Towertalk
[Top] [All Lists]

[TowerTalk] Fwd: Mast/tower design close in guyed by shrouds and spreade

To: towertalk@contesting.com
Subject: [TowerTalk] Fwd: Mast/tower design close in guyed by shrouds and spreaders?
From: Hans Hammarquist via TowerTalk <towertalk@contesting.com>
Reply-to: Hans Hammarquist <hanslg@aol.com>
Date: Mon, 19 May 2014 22:56:04 -0400 (EDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I think you can find what you are looking for if you check out design of towers 
for wind generators. They are usually a cone shaped structure. A other approach 
is how towers for high voltage (and i mean really high voltage) power lines are 
designed.


The power line towers appears much more like "standard" ham radio towers (My 
opinion.)



I would not try to design something from scratch.


Hans - N2JFS



-----Original Message-----
From: Ray, W4BYG <w4byg@att.net>
To: towertalk <towertalk@contesting.com>
Sent: Mon, May 19, 2014 3:19 pm
Subject: [TowerTalk] Mast/tower design close in guyed by shrouds and spreaders?


Is there any readily available design/build information for designing a
modest height (35 to 46 feet) ham tower or mast, that would be close guyed
using spreaders?  This would allow guying with close in dimensions, probably
anchored about the same distance from the base as the spreaders are long.  
 
It would be something like what is done with spreaders and shrouds on
sailboats.  I have studied the subject relating to sailboats but the related
sail mast bending forces seem to complicate the subject.
 
Close in guying is practical and possible with proper design.  I am aware of
an original 1000' TV tower in Jacksonville, FL (ch 4) that the guys (no
spreaders just straight guys) went out somehting less than 200'.  Ch 17's
original 1000' tower (in downtown Atlanta) was self supporting and as I
recall only had a base of about 50 maybe 75'.  So wide 2/3h and 3/4h guying
is not always necessary.  With good information, close in guying schemes
should be in some circumstances, possible and practical.
 
Anyone have any insight on the subject?

Ray, W4BYG 

"The Republic (America), can survive a fool like Barack Obama, who is after
all, merely a fool.   It is less likely to survive a multitude of fools,
such as those who made him their president." Vaclav Klaus, Former Premier
Czech Republic

 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>