This might be costly but could you have some 2 1/2 sleeves made up and use
your original bolts? Some 2 1/2 inch diameter rod drilled to accept your bolts
and welded in.
-----Original Message-----
From: Grant Saviers <grants2@pacbell.net>
Cc: towertalk <towertalk@contesting.com>
Sent: Wed, Oct 15, 2014 12:38 am
Subject: Re: [TowerTalk] [Bulk] Re: Anchor Bolt Material
This recommendation fits with what I've read about epoxy anchoring,
holes should be close to the bolt size plus 1/16 - 1/8" clearance.
I suggest you investigate the grouting materials in more depth or drill
new holes, offset from the existing ones as suggested and fill the old
holes.
Some quick grout finds via google:
e.g. http://www.lmcc.com/products/applicationguide/how_to_grout.asp
specifies conditions for grout up to 4" thick.
or
http://www.buildingsystems.basf.com/p02/USWeb-Internet/buildingsystems/en/function/conversions:/publish/content/microsites/buildingsystems/products/items/pdfs/basf-masterflow-110-an-tds.pdf
"typically the diameter of the hole should be 3 times the diameter of
the post"
Grant KZ1W
On 10/14/2014 9:00 PM, Marv Shelton wrote:
> I asked a PE at work and since the holes are so much bigger than the bolt. (
the holes are 2.5" diameter, the bolts only 1.125") he said the rated strength
of the epoxy is only good if the hole is no more than a half inch bigger in
diameter than the bolt. I confirmed this by talking to one of the epoxy product
manufacturers.
>
> Sent from my iPad
> And YES it's cool!
>
>> On Oct 14, 2014, at 8:23 AM, K7LXC@aol.com wrote:
>>
>>> Anchor bolt update:
>> Thanks for all the input everyone. It looks like epoxy, or at least
commercial grade stuff dispensed with a caulking gun is out as a potential
solution. It seems like the holes I made are too big.
>> So now I am looking at anchoring cement and trying to talk to industrial
contractors to see if there is another alternative.
>>
>> So how did you determine that your new holes won't work for putting
in your anchor bolts? The epoxy is stronger than the concrete so it seems to me
that's it's a non-issue. Are you over-thinking this?
>>
>> Cheers,
>> Steve K7LXC
>> TOWER TECH -
>> Professional tower services for amateurs
>> Cell: 206-890-4188
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|