Towertalk
[Top] [All Lists]

Re: [TowerTalk] HyGain BN-86 Balun

To: towertalk@contesting.com
Subject: Re: [TowerTalk] HyGain BN-86 Balun
From: "john@kk9a.com" <john@kk9a.com>
Date: Tue, 10 Feb 2015 08:38:46 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I had one fail over 30 years ago on my first beam antenna. It is amazing
that they still sell this product.

John KK9A


To:     "Towertalk" <towertalk@contesting.com>
Subject:        [TowerTalk] HyGain BN-86 Balun
From:   "Don " <w7wll@arrl.net>
Date:   Mon, 9 Feb 2015 19:33:30 -0800

I sent MFJ/HyGain a set of photos a couple of months back of the balun which
came from my TH7DX. The contact at the connector flange was totally corroded
and the wire around the ferrite was burned/arced across 3-4 turns.  It was
also
the home for the central OR coast spider population. this is the response I
received.

?This design is at least 30 years old. The current version uses an entirely
different design. The BN-4000B is the same, but 4kw PEP or 2KW average.?

There was no further elaboration on what the current different design was.
Someone know? I chose to replace it with a Balun Designs unit.

Don W7WLL

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>