It works well. I use that a idea as a reflector to my elevated GP on 160m
with one elevated radials as a counterpoise.
Still passiv but will become a phased array with two of those bent elements.
It out hears my relatively short beverage (160m) on the same direction.
73
Peter
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
john@kk9a.com
Sent: Mittwoch, 11. März 2015 20:29
To: towertalk@contesting.com
Subject: Re: [TowerTalk] 80 mts four square or yagi?
You can use a single tower to support four bent wire verticals. K9RS
describes this here->
http://www.kkn.net/dayton2008/multi-element%20lowband%20verticals%206.pdf
I have modeled it and the pattern looks good.
John KK9A - WP2AA
To: Towertalk Reflector <towertalk@contesting.com>
Subject: [TowerTalk] 80 mts four square or yagi?
From: Jorge Diez CX6VM <cx6vm.jorge@gmail.com>
Date: Sun, 8 Mar 2015 14:06:11 -0300
Wish someone have some analysis or field test to compare a 4SQ with sixty
1/4
WL radials each vertical and a 3 element wire yagi with boom at 115ft
Which one have more GAIN?
Thanks
Jorge
CX6VM/CW5W
Enviado desde mi iPhone
______________________________
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|