The removal tools is called an E-Z Out.
John KK9A
To: Kurt@KuhlRoad.net, towertalk@contesting.com
Subject: Re: [TowerTalk] Zerk fitting for MA-40
From: TexasRF--- via TowerTalk <towertalk@contesting.com>
Reply-to: TexasRF@aol.com
Date: Fri, 10 Apr 2015 12:06:18 -0400
Kurt, most any automotive supply has replacement Zerk fittings. The larger
issue will be removal of the remains of the old fitting. The same
automotive supply should also have tools to remove broken screws/bolts to do
that.
73,
Gerald K5GW
In a message dated 4/10/2015 10:59:46 A.M. Central Daylight Time,
Kurt@KuhlRoad.net writes:
I have a US Tower MA-40 with the rotator base. The last time I greased
the bearing, the Zerk fitting broke when I was removing the grease gun.
Does anybody have an idea of what I should replace it with? I got
crickets from US Tower.
-Kurt
KR2C
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|