Towertalk
[Top] [All Lists]

Re: [TowerTalk] Need balun advice

To: Chris Wynn <n4xfa@yahoo.com>, "TowerTalk@contesting.com" <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Need balun advice
From: Mark Robinson <markrob@mindspring.com>
Date: Tue, 10 Nov 2015 14:33:20 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
As an experiment can you turn the A3WS at right angles to the TH-7 to minimise any coupling effects between the beams and measure the swr again. This will be easier than moving the beams about which probably will not help.

What is the swr on the TH7.


73 Mark N1UK


On 10-Nov-15 12:54 PM, Chris Wynn via TowerTalk wrote:
OK, see if this changes any opinions.  When I put up the A3WS at the towers 
nested height of about 30 feet, 12 meters swr was flat, 30 meters was flat, and 
17 meters was around 1.8:1....
Now, with the A3WS MOUNTED OVER THE th-7, 12 METERS is 1.8:1, 30 meters is 
3.1:1, and 17 meters is 1.0:1........
I have the A3WS mounted about 10 to 12 feet above the TH-7.  While talking to 
Mark at DX Eng., he brought up the issue of spacing between the TH-7 and the 
A3WS..... Originally, I thought that the 10 to 12 feet of space between the two 
would be enough.  However, at this point, I HAVE NO CLUE! Would it be worth 
moving the TH-7 above the A3WS?????
While coming home for lunch,  I worked the 5Z4 on 17 meters with the tower 
nested.... Hell if I know at this point!!!
AS TO THE QUESTIONS ON HOW I MEASURED THE SWR, I have used both the MFJ 259 and 
the radio's (FT-1000 field) and get the same measurements.... And have measured 
the swr at the end of the coax connected to the balun on the yagi.....
The TH-7 is working just fine......
I appreciate all of the help and advice...My XYL is livid with me as I have been totally 
consumed with these problems, and as much as I like RF, I LIKE "THAT" better 
and don't want to end up divorced;)

Chris
  Christopher L. Wynn
Attorney-at-Law
Christopher L. Wynn, ESQ., P.C.
8473 Earl D. Lee, Suite 300
Douglasville, Ga., 30134
(770)942-8661 (Landline)
(770)577-1626 (Telecopier)
chris@chriswynnlaw.com


      On Tuesday, November 10, 2015 10:40 AM, "K7LXC@aol.com" <K7LXC@aol.com> 
wrote:
   >  Last week I had the antenna back on the ground and disassembled every trap on it, and 
found nothing out of the ordinary. ?     So what was the swr when it was on the ground? Did you 
check it?     You need to first ascertain that your antenna looks like an antenna; i.e. it has a 
dip somewhere. Put your antenna analyzer on the antenna and work your way back from there.      
BTW many times an "antenna problem" turned out to be something in the shack; e.g. coax 
jumper, coax switch, etc.  Cheers & GL,Steve      K7LXCTOWER TECH

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>