Towertalk
[Top] [All Lists]

Re: [TowerTalk] 40-30m dipole design

To: towertalk@contesting.com
Subject: Re: [TowerTalk] 40-30m dipole design
From: jimlux <jimlux@earthlink.net>
Date: Fri, 18 Mar 2016 05:28:00 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 3/17/16 3:09 PM, jimlux wrote:
On 3/17/16 2:54 PM, jimlux wrote:


I just ran a NEC model (using 4NEC2 to compute the matching network)..
the 15 meter long (30m band) dipole with a T network (91nH series, 352pF
shunt, 7.47 uH series) has 1.75 dBi gain (vs 2.14dBi for ideal dipole).

The 2:1 bandwidth is a bit more than  300 kHz; 1.5:1 bandwidth is about
150 kHz.

I leave it as an exercise for the reader to figure out the voltages and
currents on the components (which was the original question)


So, in summary

full size 40m dipole: 2.15 dBi gain
75% size dipole: 1.93 dBi gain
75% size dipole with coil Q 250, cap Q 1000: 1.75 dBi gain   (about
80-84 degree 3dB beamwidth)


the 40 m full size antenna has a swr of 1.4:1 at best and a 2: 1 BW of
about 400 kHz (not much wider than the 75% sized antenna with a matching
network).  And the match is better with the matching network (50 ohms vs
72 ohms.

The beamwidth of the full size is slightly narrower (76-80 deg)



NEC plots at

http://jim-lux.blogspot.com/


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>