On Tue,7/5/2016 7:34 AM, Jim Thomson wrote:
IF your sloping half wave dipole is UN balanced...then why insert a CMC at
the feed point at all ??
I would dump the CMC at the feedpoint, then perhaps use a CMC way downstream
, like just
before the coax meets the tower..or at the base of the tower..or both.
Nope! The first choke should ALWAYS be at the feedpoint. Additional
chokes farther down the line can be used to prevent current induced on
the feedline from causing grief in the shack (like with your rack full
of un-necessary audio processing gear). :)
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|