That sounds like a good test.
73, Jim K9YC
On Tue,7/5/2016 8:03 AM, Steve Hunt wrote:
What I do is connect the choke across the output of a tuner to
generate a CM signal across the winding. Adjust the tuner for a good
match to 50 Ohms and drive it from a transmitter. That way you have a
well-controlled experiment.
You can measure the CM voltage across the choke and the current
through it, or calculate them knowing the power output from the Tx.
Steve G3TXQ
On 05/07/2016 14:35, jimlux wrote:
It seems one could come up with a test fixture that is a bit more
compact (and repeatable) than a piece of wire in the air.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|