I thought a StepIR had some kind of conductive flexible tape on inside of
fiberglass. If so, what's up with retracting elements to reduce wind load?
Stan, K5GO
Sent from Stan's IPhone
> On Aug 19, 2016, at 7:44 PM, Chris Hoelzle <choelzle@cox.net> wrote:
>
> Hello All. I am putting up a 80 foot Rohn 55G. I am in a 115 mph wind zone.
>
>
>
> I need Beam advice - I have just about settled on a StepIR DB36. Even though
> the specs show 100 mph for the beam, in talking to the factory, I am told
> "it will be fine" as long as you retract the elements in high wind. Is that
> true or should I go a different direction?
>
>
>
> I like the simplicity of the StepIR as my alternative will be multiple beams
> and ring rotators and all that fun.
>
>
>
> Second question - Assuming I go with the 55G and the DB36, can anyone guide
> me to a good reliable rotator that I won't have to rebuild every year.
>
>
>
> Thanks so much
>
>
>
> NN6CH
>
> Chris Hoelzle
> choelzle@cox.net
> Laguna Niguel, CA
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|