Towertalk
[Top] [All Lists]

Re: [TowerTalk] US Tower gearbox

To: John Holmes <w9ily@comcast.net>
Subject: Re: [TowerTalk] US Tower gearbox
From: Jeff Draughn <n0ost99@gmail.com>
Date: Thu, 8 Sep 2016 09:36:04 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I assume you drain the oil out the bottom all I see is an Allen head screw
is that the drain?
Same on the top.. I assume again that is the fill.
Do you just fill to the top or is there a way to check the level? Tower is
UST HDX-555.
Thanks for any info
Jeff
N0OST

On Monday, September 5, 2016, John Holmes <w9ily@comcast.net> wrote:

> I was reading with interest the explanations of the lube needed for US
> Towers. My TX455 has been up for five years now and, while I have lubed the
> grease fittings regularly, I've never changed the oil. I want to do this
> now
> using SHC630 as K6UJ noted. However, before I order this, how much would
> you
> recommend I order? Would 2 quarts be enough to both flush the gear assemble
> and refill it? I'd hate to have too little on hand after draining.
> Thanks for your help.
> 73,
>
> John W9ILY
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com <javascript:;>
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>