Towertalk
[Top] [All Lists]

Re: [TowerTalk] US Tower gearbox

To: Bob K6UJ <k6uj@pacbell.net>, towertalk@contesting.com
Subject: Re: [TowerTalk] US Tower gearbox
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Fri, 9 Sep 2016 06:56:55 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Mine is a 281 series IIRC.  It basically has the
same set of design elements, but they are just
arranged differently.  There are two drain plugs
at the same height.  You use the one that is
easier to get at.  The one that is under the
chain guard would be the one you use to completely
fill up the box when storing horizontally.  In
the horizontal position, this plug is on top.
At least I guess that was what they intended.

73
Rick N6RK

On 9/8/2016 8:46 PM, Bob K6UJ wrote:
Rick,

Cant figure out what you have.
Evidently we have different series of the of Hub City worm gear boxes.
My HDX589 has a Hub City 321 series box.
Here's some pics.  The fill plug is about 2/3 up the side and the drain
plug is
down near the bottom on the other side of the case.

https://k6uj.shutterfly.com


Bob
K6UJ




On 9/8/16 9:17 AM, Richard (Rick) Karlquist wrote:


On 9/8/2016 8:00 AM, Jim Thomson wrote:

##  Whoa.   There are  THREE plugs, one on the bottom, one on the
top, and one
on the side,  close to the top.  Remove the top and side plugs..and
fill till the oil
comes out the side plug, then install  both side and top plugs.


How are you defining "top" vs "bottom"?  On my HDX-5106, the gear
box appears to be mounted "upside down:  The name plate
printing reads upside down and the embossed "Hub City"
on one of the surfaces reads upside down.  This is the
way UST engineered it.  IMHO, UST installed it correctly
irregardless of the orientation of the text.  I don't
think it would make sense to mount it with the text upright.

Having said that, on my tower, such as it is, there are two plugs
near the surface of the hub city box that faces the ground.  These
are at about the same level, like I could use either one to drain.
There would be a couple of inches of oil remaining to be sucked
out.  One is easily accessible and the other would require
removing the safety guard over the chain.  The third plug is
just about midway between top and bottom, however those terms are
defined.

When Skip changed the oil for me 4 years ago, I believe he filled
through the 3rd hole and just put in oil until it dripped out through
this hole.

In order for my gearbox to meet the description of the plugs
you gave, it would have to be mounted so the text is "vertical"
and the shafts are vertical instead of horizontal.  Vertical shafts
would totally not work on this tower.

Any comments?

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>