Towertalk
[Top] [All Lists]

[TowerTalk] LMR600 male DIN

To: <towertalk@contesting.com>
Subject: [TowerTalk] LMR600 male DIN
From: "Jim Thomson" <jim.thom@telus.net>
Date: Fri, 9 Sep 2016 07:08:17 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Date: Thu, 8 Sep 2016 21:46:14 -0400
From: "john@kk9a.com" <john@kk9a.com>
To: towertalk@contesting.com
Subject: Re: [TowerTalk] LMR600 male DIN

Andrew LDF cables are copper tubing, of course you can kink them if you
make a sharp bend or you can flatten the cable with enough pressure. If
you plan on running feedline across your driveway I would pick something
else. If you need sharp bends consider FSJ4. Why don't you obtain a sample
of each and see which suits YOUR particular needs better.

John KK9A - W4AAA


##  Both  1/2 inch heliax.. and  LMR-600DB   use a copper clad 
aluminum center conductor....  no tubing used on these 2 x  cables.

##  7/8 inch heliax uses cu tubing...as does LMR-1200DB. 

##  You  have to be careful  with the cu coated solid al  center conductor.
Easy to nick the cu, and ring it 360 degs...resulting in a cu-al-cu  center. 

Jim   VE7RF 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>