Hello Jim
Ok thanks very much for the help
Will try it
73,
Jorge
Enviado desde mi iPhone
> El 10 set. 2016, a las 15:26, Jim Brown <jim@audiosystemsgroup.com> escribió:
>
>> On Sat,9/10/2016 10:58 AM, Jorge Diez - CX6VM wrote:
>> I dont have a conector on the AVA7-50
>
> You will need to connect to it in some way. Best is to put a connector on one
> end (you will need one anyway), with a cable and/or adapter that can mate
> with your analyzer. Alligator clips on short cable will work, but will add a
> small error to the measurement.
>
> Study the manual for your AIM unit for instructions for TDR. If it doesn't do
> TDR, use the stub method posted in my earlier email.
>
> 73, Jim K9YC
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|