Check with Ken @ JK Antennas, he may already have a file for it... Ron,
WV4P
On Thu, 28 Nov 2019 at 12:57, Tom Hellem <tom.hellem@gmail.com> wrote:
> Herb-
> I have done alot of experimenting with the old F12 C3 line.
> What you are proposing is certainly feasible. If I were going to do it
> I would definitely model it in EZNec first before I touched a single
> nut or bolt. You can spend a hideous amount of time tuning if
> you just start out by changing element lengths.
>
> Tom
> K0SN
>
>
>
> On Thu, Nov 28, 2019 at 10:58 AM Herbert Schoenbohm <
> herbert.schoenbohm@gmail.com> wrote:
>
> > I have a C3S tribander which I seldom use except when on WARC bands. It
> is
> > useable there but not as good as I think it would be modifying it for 24
> > and 18Mhz. I wonder if anyone has tried that? I don't care about 10 and
> > 15. I think by just changing the dimension, i.e making the 10-meter
> > elements longer for 24Mhz and the 15-meter element shorter to cover 18
> > Mhz, would possibly work. Is there anyone who has done this
> successfully?
> >
> > Herb, KV4FZ
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|