Hi Jim,
Sorry to sound dumb, but what is an hb coil?
73, Rich, N6KT
On Saturday, December 21, 2019, 02:13:15 PM PST, Jim Thomson
<jim.thom@telus.net> wrote:
Date: Fri, 20 Dec 2019 14:01:20 -0600
From: N5KM - Kris <n5kilomike@gmail.com>
To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: [TowerTalk] Force12 rebuild
<Im rebuilding my Force12 40m yagi. What would you recommend as replacement
<for the alumoweld linear loading wires? Some of these wires have snapped in
<the past due to years of vibration.
<Note: as part of the rebuild I am adding truss supports for the 3 elements
<in order to remove the stress on the linear loading wires.
<Kris N5KM
## replace the LL alumoweld fubar with hb coils... like either al or
cu. Use dacron rope for the
new truss supports.
## Dont even think about using SS wire..... the losses are beyond sky
high. It will break anyway, cuz of metal fatigue.
Stranded CU wire would work, but hb coils are simpler.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|