Steve needs help Joining wires:
<SNIP>
I need to electrically and mechanically join 2 perpendicular pieces of
bare, #12 copper wire. They will be subject to wind forces which have
repeatedly broken mere solder joints.
Suggestions ?
Steve, N2IC
<snip>
Once again, Google is your friend:
[ https://www.instructables.com/Master-a-perfect-inline-wire-splice-everytime/
| https://www.instructables.com/Master-a-perfect-inline-wire-splice-everytime/
]
This should give you the mechanical strength you need. Remember that solder
will deteriorate when exposed to weather so protect the splice.
You can also, sometimes, find aluminum split bolts for 12 ga wire.
Good luck.
73
K9WN Jake
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|