Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tower Collapse in South Dakota

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Tower Collapse in South Dakota
From: Jim W7RY <jimw7ry@gmail.com>
Reply-to: jimw7ry@gmail.com
Date: Fri, 20 Jan 2023 22:04:34 -0600
List-post: <mailto:towertalk@contesting.com>
Yup. Pretty difficult for an angle leg tower to fill the legs up with water.

Jim W7RY


On 1/20/2023 9:26 PM, K5CG wrote:
I've been up many 3ertall towers (most made by Leblanc & Royle of Oakville 
Ontario at the time) and almost all of them were triangular with angle iron legs 
bent to 120 degrees.

They made at least one for the Canadian Coast Guard that was to be installed in a 
Maritime province that had 12" diameter solid steel legs designed for heavy ice 
loading.

----- Original Message -----
From: "Jim W7RY" <jimw7ry@gmail.com>
To: "towertalk" <towertalk@contesting.com>
Sent: Friday, January 20, 2023 3:02:47 PM
Subject: Re: [TowerTalk] Tower Collapse in South Dakota

A 1000 foot tower most likely has solid rod legs.

Jim W7RY



On 1/20/2023 1:10 PM, Joseph B. Fitzgerald wrote:
Interesting.  I had a notion that lattice towers fail due to exceeding the 
bending moment of the lower part of the structure trying to accelerate the 
upper portion too fast ... this is classic phenomenon in smokestack demolition.

Take a look at this video of a 480 foot tower with a pier pin in West Virginia 
that had to come down.

https://www.youtube.com/watch?v=yKQ0p5L_qvU

BTW that tower had to come down because water collected inside the tower legs, 
froze and split the tubes.  Check your weep holes each year before the first 
frost is forecast!!!

I suspect the South Dakota tower was simply built unusually well and could deal 
with the bending moment, while the West Virginia tower was not and buckled.

de KM1P Joe
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

--
Thanks and 73, Jim W7RY
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>