Towertalk
[Top] [All Lists]

Re: [TowerTalk] Assembling a Yagi

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Assembling a Yagi
From: <john@kk9a.com>
Date: Thu, 26 Jan 2023 19:31:30 -0500
List-post: <mailto:towertalk@contesting.com>
If this is a purchased antenna there is typically no adjust of the inner or
center element, only the sections that telescope into it need to be set to
the correct length.  If this is your own design, the element length depends
on how the elements are mounted to the boom.

John KK9A


Art Greenberg WA2LLN wrote:

The instructions for setting element length aren't clear. Do I measure 
from element tip to the side of the boom, or to the center of the boom?

I think its the later ...

TNX

-- 
Art Greenberg
WA2LLN
art at artg.tv

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>