Be VERY careful with eBay sources unless you want METRIC sizes. If you run
across ANY that you like ANYWHERE better ask them if they are METRIC threads
or SAE. That is unless you don't care. -Mike, K4CVL
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim
W7RY
Sent: Friday, June 02, 2023 4:56 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] U-Bolt Sources
DX Engineering.
Jim W7RY
On 6/2/2023 11:03 AM, Pete Smith N4ZR wrote:
> I need some good quality stainless U-bolts for 2" OD tubing, > preferably
the type with the bolt plate that itself fits the tubing
> OD, rather the simple flat plates sold by local hardware stores. I >
have looked on line, without success so far. Any ideas? >
--
Thanks and 73, Jim W7RY
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|