Towertalk
[Top] [All Lists]

Re: [TowerTalk] Feedline (choke) question

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Feedline (choke) question
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Sat, 27 Sep 2025 12:16:20 -0700
List-post: <mailto:towertalk@contesting.com>
Exactly right. In the words of the late Neil Muncy, W3WJE, a great engineer who in 1995 recognized "The Pin One Problem" as the major cause of RFI, "The earth is not a sump into which hum, buzz, and RFI is poured!"

What solves all of the problems being discussed is BONDING! That is, the connecting together of every earth connection and every chassis by short, fat copper. That, in addition to an earth connection at power entry, and at any outbuildings, is required by LAW -- that is, Local Electrical Building Codes, the model for which is the National Electric Code, written by a bunch of very smart engineers. The earth connection is ONLY for electrical safety and lightning protection, and Bonding is a critical part of that.

More wise words from Neil Muncy at one of his workshops in Chicago. "Park at the end of runway out at O'Hare (substitute your local large airport), and call me collect when you see an aircraft taking off trailing a ground wire!"

I was paid to teach this stuff to electrical contractors who install sound and video systems for large and small facilities, taking over that gig from Neil when he was no longer able to do it. My slide decks for that are here.

http://k9yc.com/InfoComm-PowerSystems2012.pdf
http://k9yc.com/InfoComm-Grounding2012.pdf

I was also commissioned to write a "white paper" on the topic. This is the international version, which includes a section on the differences in how power systems are done in the UK and EU.

http://k9yc.com/SurgeXPowerGround.pdf

And these are slides for talks I've done at Pacificon, Visalia, and to several large clubs. http://k9yc.com/GroundingAndAudio.pdf

Most recently, I worked extensively with Ward Silver, N0AX, on both versions of his excellent ARRL books on the topic.

ALL of this is nothing more than applied fundamentals. One of the best parts of my education was a 3-day workshop by the late Henry Ott, a veteran of AT&T Bell Labs, who consulted on EMC to dozens of the major corporations.

Jim Thompson -- bonding on the tower you describe is textbook correct -- that is, a serious choke at the feedpoint, running coax/hard line down the inside of the tower, bonding shield to the tower top and bottom. That bonding is for lightning protection for the feedline -- failure to do that can result in arcing inside the feedline in the event of a strike. Many years ago, I found a piece of Andrew 7/8-in at a decommissioned AT&T Long Lines site where I had a station for a while that had exactly that fault. I discovered the fault when I tried to use it in my station at home years later.

73, Jim K9YC




On 9/27/2025 11:07 AM, David Gilbert wrote:
That's a fallacy.  It simply isn't.

Dave   AB7E


On 9/27/2025 10:31 AM, Brian Beezley wrote:
I've always thought of ground as a current sink.




_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>