VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] 1296

To: vhfcontesting@contesting.com
Subject: Re: [VHFcontesting] 1296
From: radioman01 <radioman01@comcast.net>
Reply-to: radioman01@comcast.net
Date: Sun, 28 Jan 2007 21:51:36 -0500
List-post: <mailto:vhfcontesting@contesting.com>
Hi Jamie..

a pre-amp is a must for that band, but im a little worried about 125 ft 
of coax on 1.2
thats a major run of cable for RG-8 type
have you looked at the losses at those freq for that cable?
according to the times microwave chart LMR-400 at 900meg at 100 feet is 
3.9db loss..
and at 1500mhz 5.10 db loss..
that means at 1.2 you could be loosing more then 1/2 the power before it 
gets to the antenna
if im wrong someone pse step in..

but a preamp even at a 40 ft run of LMR-400 cable that i have made the 
difference for the weak ones


Tony
NN1D



Jamie Dupree NS3T wrote:
> A question for you experts out there.  In the Spring, I plan to put 
> some small antennas up on the roof, including a 1296 loop beam.
> The coax run is straight to my rig with 125 feet of low loss coax (Bury Flex.)
>
> Forgive my rookie question - will I need a pre-amp on the mast
> for that band?
>
> 73 Jamie NS3T
>
>
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
>   
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>