VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] TS-2000X questions

To: k9kl@centurytel.net, VHFcontesting@contesting.com
Subject: Re: [VHFcontesting] TS-2000X questions
From: aa4zz@aol.com
Date: Mon, 21 Jan 2008 23:59:09 -0500
List-post: <mailto:vhfcontesting@contesting.com>
Power on the ts2000X can be set for each vhf band and hf by menu. I ran a DEMI 
xvtr for 222 on the hf side, and SSB xvtr for 903 off 144 and 432 and 1296 
direct during the uhf contest.
The freq readout adjust for transverters is not useful since it adjusts all 
bands by the same amount.
The INRAD crystal filter is a big help with nearby stations.

73 Paul AA4ZZ


-----Original Message-----
From: Gregg Seidl <k9kl@centurytel.net>
To: VHFcontesting@contesting.com
Sent: Mon, 21 Jan 2008 9:19 pm
Subject: [VHFcontesting] TS-2000X questions



I have been trying to think up of a way to reduce the "clutter" in my shack 
and thought I think about going away from xverters and back to a rig.Namely 
the 2000X.
My questions are; can you have different drive levels for 
different bands.I need 3 watts for 1296,60 watts for 144 and 50 for 432.Also 
can you use the hf port as an xverter for say 2304.I use a 817 now that 
needs about 5 watts,can you set that up via menus to ONLY be able to put out 
5 watts at 28 Mhz so I don't blow it up.I think you can adjust the rigs 
display to read xverter freq on HF?I don't want to rely on turning down this 
button or that knob,I want it to be all menu so I don't blow anything up.Any 
one give me a heads up before I order one??  Gregg K9KL 


_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting


________________________________________________________________________
More new features than ever.  Check out the new AOL Mail ! - 
http://webmail.aol.com
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>