Here are some closeups of the bulkhead.
http://www.k5rnt.com/html/window_bulkhead.html
David All wrote:
> The photo of your rover on your site. Can you post a close up photo
> of the window where the feed lines enter the vehicle.
>
> Feel free to look at my web site www.n3xud.webs.com
> <http://www.n3xud.webs.com/>
>
> Dave N3XUD
> n3xudfm19@gmail.com <mailto:n3xudfm19@gmail.com>
>
> On Sat, Jul 4, 2009 at 12:37 AM, Dustin Williams <dustin@k5rnt.com
> <mailto:dustin@k5rnt.com>> wrote:
>
> I recently changed from a 1/4 wave vertical mag mount on the top
> of the
> suv to an M2 loop mounted at the top of the receiver hitch mounted
> mast. I have to say the loop worked better for me with the
> exception of
> working other rovers that were running verticals. Please note that my
> loop "points" back in other words it is not over the metal car instead
> it is 12 ft above the ground. See my web page for some photos.
>
> Just my $0.02
> Dustin
> K5RNT/R
>
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com <mailto:VHFcontesting@contesting.com>
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|