| To: | BEAMAR@aol.com, VHFcontesting@contesting.com |
|---|---|
| Subject: | Re: [VHFcontesting] Design for a 6M Rover Yagi... |
| From: | Vhfrover <vhfrover@aol.com> |
| Date: | Tue, 2 Aug 2011 16:12:17 -0400 (EDT) |
| List-post: | <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com> |
I also like the M2 6M-3SS however I replaced the stock mast U-bolt hardware with a little better and larger U-bolt clamp. Other than that, it works like a charm! 73 Mike WB8BZK/R and portable Buddy Morgan, WB4OMG wrote... Assembling antennas for portable/rover operation is a pain. For the June contest, at WQ4M, EL 79, we used the M2 6M-3SS. Although it was not as easy to assemble as Marshall wants, it was a lot easier than the M2 6M3, that I own. It worked very well. _______________________________________________ VHFcontesting mailing list VHFcontesting@contesting.com http://lists.contesting.com/mailman/listinfo/vhfcontesting |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [VHFcontesting] Design for a 6M Rover Yagi..., Jerry |
|---|---|
| Next by Date: | Re: [VHFcontesting] Design for a 6M Rover Yagi..., Mike Fahmie |
| Previous by Thread: | Re: [VHFcontesting] Design for a 6M Rover Yagi..., Jerry |
| Next by Thread: | Re: [VHFcontesting] Design for a 6M Rover Yagi..., Mike Fahmie |
| Indexes: | [Date] [Thread] [Top] [All Lists] |