VHFcontesting
[Top] [All Lists]

[VHFcontesting] Changing from WSJT to SSB...

To: VHF Contesting <vhfcontesting@contesting.com>
Subject: [VHFcontesting] Changing from WSJT to SSB...
From: Marshall-K5QE <k5qe@k5qe.com>
Date: Wed, 18 Sep 2019 02:31:41 +0000
List-post: <mailto:vhfcontesting@contesting.com>
Hello all...I have seen several folks post that it was difficult to switch from WSJT to SSB.  I don't understand this at all.  On my radios, I have "presets" for all the common channels that we use.  So we have Channel1 to be 50.125MHz, 2 would be 50.133, 3 would be 50.260, 4 would be 50.265, 5 would be 50.313.  To change from WSJT to SSB, just push the down arrow until the VFO says 50.125, step on the footswitch, and talk into the mike.  To go back to FT8, just push the up arrow until the VFO says 50.313 and click Enable TX.  Seems pretty simple to me.

There is no need to over think these things.....

73 Marshall K5QE
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
<Prev in Thread] Current Thread [Next in Thread>