I saw info on the Rigblaster option in the archive and checked out
their website. It is a very nice solution, but it also is quite
expensive. Wondering if anyone else has a less expensive solution? Has
anyone made the cables for the 850, or do I need to get a Rigblaster.
Doesn't the Rigblaster use a Com port. I used my one and only Com port
on the laptop for the IF-232c box. I can get another Com port thru the
USB port to a COM port converter but those are expensive. Do I need
another COM port?
Sorry for so many questions,
Can't wait to start using WriteLog,
Thanks for your help,
Kent
> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of Byron Peebles
> Sent: Monday, October 02, 2000 7:24 PM
> To: Kent Belan; writelog@contesting.com
> Subject: Re: [WriteLog] Kenwood 850 to Laptop cables
>
>
>
> After researching this question a few months ago,
> I purchased the RIGblaster hardware that feeds the mic jack.
>
> 73, Byron
>
> At 19:20 2000-10-02 -0400, Kent Belan wrote:
> >What I need help with is the cables from the computer
> >sound card to the 13pin ACC2 port on the 850. Does anyone know the
> >configuration (or a better solution) and what else might
> be needed to
> >do RTTY/FSK/CW with WriteLog.
>
> ______________________________________________________
> ARS NZ3O Byron Peebles members.bellatlantic.net/~byron/
> PO Box 412
> voice: (610)715-9394
> Paoli, PA 19301-0412 USA email: nz3o@arrl.net
> ------------------------------------------------------------
> ----------------------------------
> -
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|