Yes, does it has to be in any particular area or the .INI file ?
----- Original Message -----
From: "WA9ALS - John" <wa9als@starband.net>
To: "Juan Carlos Munoz." <jmunoz@itelgua.com>
Sent: Sunday, September 23, 2001 4:26 PM
Subject: Re: [WriteLog] DXTelnet / WriteLog 10.27G
> Juan, do you have in the WL ini file:
>
> [OBJECTS]
> pktObject=DXT2WL.clsWlPacket
>
> ?? Hope this helps!
>
> www.qsl.net/wa9als/dxtelnet.htm
>
>
> ----- Original Message -----
> From: "Juan Carlos Munoz." <jmunoz@itelgua.com>
> To: "Writelog Mailing List" <writelog@contesting.com>
> Sent: Sunday, September 23, 2001 5:12 PM
> Subject: [WriteLog] DXTelnet / WriteLog 10.27G
>
>
> >
> > Hi all,
> >
> > Been reading your posts about DXTelnet and WriteLog which I also
> > have both and their latest versions.
> >
> > I print out the DXT2WL.TXT file in order to install and use DXTelnet
with
> my
> > WriteLog version 10.27G (the latest) and follow the instructions there
but
> > doesn't work.
> >
> > To begin on the first instruction reads:
> > 1) Start DXTelnet, go to "Configuration" menu then, "Links" and in the
> > "Link to DXHUNTER" section set the "DXHUNTER installation path" string
to:
> > C:\DXT2WL\
> > Check the "Enable Link" check box, press "Save", quit and restart
DXTelnet
> > connecting to any site, for instance connect to CQDX IRC.
> >
> > But I'm not subscribe to DXHUNTER and when I did this part of course it
> > returned me with an error saying the the path was incorrect !
> > Do I also need DXHunter for this ?
> >
> > Also the instructions reads that start WriteLog and under the VIEW menu
> > choose PACKET WINDOW which I don't have that option ?
> >
> > So it's not working for me, any ideas, comments or suggestions, thanks.
> >
> > Juan Carlos Munoz.
> > TG9AJR
> > jmunoz@itelgua.com
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> >
>
>
>
|