--=====================_220171870==_.ALT
Content-Type: text/plain; charset="us-ascii"; format=flowed
Juan;
Did you read my note. Do you have the Link to DXHUNTER option checked in
the Options Menu?
You should.
At 12:26 AM 9/24/2001, Juan Carlos Munoz. wrote:
>Well to begin found the Packet window under Windows at WL but nothing comes up
>hit F9 to see the path as reads again on the DXT2WL.TXT file and the path
>that comes
>is C:\DXTELNET\DXT2WL\
>
>----- Original Message -----
>From: <mailto:gbaron@home.com>Gil Baron
>To: <mailto:jmunoz@itelgua.com>Juan Carlos Munoz. ;
><mailto:writelog@contesting.com>Writelog Mailing List
>Sent: Sunday, September 23, 2001 11:39 AM
>Subject: Re: [WriteLog] DXTelnet / WriteLog 10.27G
>
>At 10:12 PM 9/23/2001, Juan Carlos Munoz. wrote:
>>Hi all,
>>
>>Been reading your posts about DXTelnet and WriteLog which I also
>>have both and their latest versions.
>>
>>I print out the DXT2WL.TXT file in order to install and use DXTelnet with my
>>WriteLog version 10.27G (the latest) and follow the instructions there but
>>doesn't work.
>>
>>To begin on the first instruction reads:
>>1) Start DXTelnet, go to "Configuration" menu then, "Links" and in the
>>"Link to DXHUNTER" section set the "DXHUNTER installation path" string to:
>>C:\DXT2WL\
>>Check the "Enable Link" check box, press "Save", quit and restart DXTelnet
>>connecting to any site, for instance connect to CQDX IRC.
>>
>>But I'm not subscribe to DXHUNTER and when I did this part of course it
>>returned me with an error saying the the path was incorrect !
>>Do I also need DXHunter for this ?
>I don't think you need DXHUNTER. That is not involved at all. Be sure the
>path is correct.
>I have c:\dxtelnet\dxt2wl\
>I think you have to have the link to DXHUNTER checked in the OPTIONS menu.
>It is using that jsut to tell it to do the link. Actually dxt2wl is
>replacing dxhunter.
>
>
>
>
>
>>Also the instructions reads that start WriteLog and under the VIEW menu
>>choose PACKET WINDOW which I don't have that option ?
>
>
>There is an error. Use the Windows Menu to select that.
>
>>So it's not working for me, any ideas, comments or suggestions, thanks.
>>
>>Juan Carlos Munoz.
>>TG9AJR
>>jmunoz@itelgua.com
>>
>>_______________________________________________
>>WriteLog mailing list
>>WriteLog@contesting.com
>>http://lists.contesting.com/mailman/listinfo/writelog
>Gil Baron http://members.home.com/gbaron
>44.08208 N 92.51263 W 1055'
>"Baila como nadie te ve"
Gil Baron http://members.home.com/gbaron
44.08208 N 92.51263 W 1055'
"Baila como nadie te ve"
--=====================_220171870==_.ALT
Content-Type: text/html; charset="us-ascii"
<html>
<br>
Juan;<br>
Did you read my note. Do you have the Link to DXHUNTER option checked in
the Options Menu?<br>
You should.<br><br>
At 12:26 AM 9/24/2001, Juan Carlos Munoz. wrote:<br>
<blockquote type=cite class=cite cite><font size=2>Well to begin found
the Packet window under Windows at WL but nothing comes up</font><br>
<font size=2>hit F9 to see the path as reads again on the DXT2WL.TXT file
and the path that comes</font><br>
<font size=2>is C:\DXTELNET\DXT2WL\</font><br>
<dl>
<dd>----- Original Message -----
<dd>From:</b> <a href="mailto:gbaron@home.com";>Gil Baron</a>
<dd>To:</b> <a href="mailto:jmunoz@itelgua.com";>Juan Carlos Munoz.</a> ;
<a href="mailto:writelog@contesting.com";>Writelog Mailing List</a>
<dd>Sent:</b> Sunday, September 23, 2001 11:39 AM
<dd>Subject:</b> Re: [WriteLog] DXTelnet / WriteLog 10.27G<br><br>
<dd>At 10:12 PM 9/23/2001, Juan Carlos Munoz.
wrote:<blockquote type=cite class=cite cite>
<dd>Hi all,<br><br>
<dd>Been reading your posts about DXTelnet and WriteLog which I also
<dd>have both and their latest versions.<br><br>
<dd>I print out the DXT2WL.TXT file in order to install and use DXTelnet
with my
<dd>WriteLog version 10.27G (the latest) and follow the instructions
there but
<dd>doesn't work.<br><br>
<dd>To begin on the first instruction reads:
<dd>1) Start DXTelnet, go to "Configuration" menu then,
"Links" and in the
<dd>"Link to DXHUNTER" section set the "DXHUNTER
installation path" string to:
<dd>C:\DXT2WL\
<dd>Check the "Enable Link" check box, press "Save",
quit and restart DXTelnet
<dd>connecting to any site, for instance connect to CQDX IRC.<br><br>
<dd>But I'm not subscribe to DXHUNTER and when I did this part of course
it
<dd>returned me with an error saying the the path was incorrect !
<dd>Do I also need DXHunter for this ?</blockquote>
<dd>I don't think you need DXHUNTER. That is not involved at all.
Be sure the path is correct.
<dd>I have c:\dxtelnet\dxt2wl\
<dd>I think you have to have the link to DXHUNTER checked in the OPTIONS
menu. It is using that jsut to tell it to do the link. Actually dxt2wl is
replacing dxhunter.<br><br>
<br><br>
<br><br>
<blockquote type=cite class=cite cite>
<dd>Also the instructions reads that start WriteLog and under the VIEW
menu
<dd>choose PACKET WINDOW which I don't have that option
?</blockquote><br><br>
<dd>There is an error. Use the Windows Menu to select that.<br><br>
<blockquote type=cite class=cite cite>
<dd>So it's not working for me, any ideas, comments or suggestions,
thanks.<br><br>
<dd>Juan Carlos Munoz.
<dd>TG9AJR
<dd>jmunoz@itelgua.com<br><br>
<dd>_______________________________________________
<dd>WriteLog mailing list
<dd>WriteLog@contesting.com
<dd><a href="http://lists.contesting.com/mailman/listinfo/writelog";
eudora="autourl">http://lists.contesting.com/mailman/listinfo/writelog</a></blockquote><font
face="Courier New, Courier">
<dd>Gil Baron
<a href="http://members.home.com/gbaron";
eudora="autourl">http://members.home.com/gbaron</a>
<dd>44.08208 N 92.51263 W 1055'
<dd>"Baila como nadie te ve" </font></blockquote>
<x-sigsep><p></x-sigsep>
</dl><font face="Courier New, Courier">Gil Baron
<a href="http://members.home.com/gbaron";
eudora="autourl">http://members.home.com/gbaron</a><br>
44.08208 N 92.51263 W 1055'<br>
"Baila como nadie te ve" <br>
</font></html>
--=====================_220171870==_.ALT--
|