I see it is possible to use the same port for rig control and CW but you
have to perform surgery on your cable. That is why I would not do it, but if
you are short of ports, you can.
> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of Gil Baron
> Sent: Thursday, November 28, 2002 6:26 AM
> To: Steve Sutterer; writelog@contesting.com
> Subject: RE: [WriteLog] Rig control and CW Keying won't work at same
> time
>
>
> I am using WriteLog and CW keying works fine. I am running XP for
> the OS but
> that should not be the problem (unless you try to use LPT for CW)
> so I will
> give you my setup. I would not try to use LPT for keying on any os and it
> will not work at all on NT/WIN2000/XP in most cases without a driver.
>
>
> I don't think you can use the same port for CW and rig control or least I
> would not do it.
>
>
|