Hello,
Thanks for all the sugestions, the problem is solved now.
Luca IK2NCJ gave the solution.
WL.ini [Ports]
CW_ON_PIN1=1
After adding this line, it works fine.
Luca thank you very much!!
See you all in the Dutch PACC contest 8/9 february.
73 Ronald PA3EWP
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Ronald Stuy, PA3EWP
Sent: Tuesday, January 28, 2003 6:52 PM
To: WriteLog@contesting.com
Subject: [WriteLog] PI4COM need help with CW problems
Hello,
The last 2 weeks I am busy to get all the networked multi/multi PC's ready
for the upcoming PACC contest at PI4COM.
I am working now on a PC which give my problems in CW.
We use the LPT1 port for CW (just a normal CT cable).
I think there is a timing problem in the computer.
When transmitting some letters or figures, they are totally disturbed (no CW
at all hi).
I am working with W98 second edition (including the latest patches).
The hardware is a Tulip Vision Line P5/166 64 Mb memory.
There is an internal network card available.
I disabled all the hardware that I don't use (like USB and second COM-port).
I changed the LPT1 port from output only ==> ECP ==> Bi-directional.
In the writelog.ini I put the line: LPT1:0x378 (the same port as in the
BIOS).
The virusscanner is disabled.
So there is nearly no difference at all changing the parameters.
All the other PC's worked fine (even they are slower than this one).
I hope that someone has a good suggestion for me.
Ronald Stuy, PA3EWP
member:
PI4COM (Contestgroup Oude Maas)
http://www.qsl.net/pi4com
LLDXT (Low Land DX-pedition Team)
http://www.qsl.net/lldxt/index.html
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
|