WriteLog
[Top] [All Lists]

[WriteLog] PI4COM CW problems SOLVED!!

To: <writelog@contesting.com>
Subject: [WriteLog] PI4COM CW problems SOLVED!!
From: rojomn@charter.net (rojomn)
Date: Wed Jan 29 23:14:56 2003
A better question is why should the user have to be concerned with this at
all. When you set if for CW that is unique it seems to me and any further
configuration should be handled by the program. I know this is needed but it
has never been well explained why or when. I am glad you found the answer.


> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com]On Behalf Of Ronald Stuy, PA3EWP
> Sent: Wednesday, January 29, 2003 11:14 AM
> To: WriteLog@contesting.com
> Subject: RE: [WriteLog] PI4COM CW problems SOLVED!!
>
>
> Hello,
>
> Thanks for all the sugestions, the problem is solved now.
> Luca IK2NCJ gave the solution.
>
> WL.ini [Ports]
> CW_ON_PIN1=1
>
> After adding this line, it works fine.
> Luca thank you very much!!
>
> See you all in the Dutch PACC contest 8/9 february.
>
> 73 Ronald PA3EWP
>
>
>
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com]On Behalf Of Ronald Stuy, PA3EWP
> Sent: Tuesday, January 28, 2003 6:52 PM
> To: WriteLog@contesting.com
> Subject: [WriteLog] PI4COM need help with CW problems
>
>
> Hello,
>
> The last 2 weeks I am busy to get all the networked multi/multi PC's ready
> for the upcoming PACC contest at PI4COM.
> I am working now on a PC which give my problems in CW.
> We use the LPT1 port for CW (just a normal CT cable).
> I think there is a timing problem in the computer.
> When transmitting some letters or figures, they are totally
> disturbed (no CW
> at all hi).
>
> I am working with W98 second edition (including the latest patches).
> The hardware is a Tulip Vision Line P5/166 64 Mb memory.
> There is an internal network card available.
>
> I disabled all the hardware that I don't use (like USB and second
> COM-port).
> I changed the LPT1 port from output only ==> ECP ==> Bi-directional.
> In the writelog.ini I put the line: LPT1:0x378 (the same port as in the
> BIOS).
> The virusscanner is disabled.
>
> So there is nearly no difference at all changing the parameters.
> All the other PC's worked fine (even they are slower than this one).
>
> I hope that someone has a good suggestion for me.
>
>
> Ronald Stuy, PA3EWP
>
> member:
> PI4COM (Contestgroup Oude Maas)
> http://www.qsl.net/pi4com
>
> LLDXT (Low Land DX-pedition Team)
> http://www.qsl.net/lldxt/index.html
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>


<Prev in Thread] Current Thread [Next in Thread>