WriteLog
[Top] [All Lists]

RE: [WriteLog] update on log scroll

To: <jpixton@shentel.net>, <writelog@contesting.com>
Subject: RE: [WriteLog] update on log scroll
From: "Don Cassel" <doncassel@compuserve.com>
Reply-to: doncassel@compuserve.com
Date: Fri, 20 Feb 2004 08:10:39 -0500
List-post: <mailto:writelog@contesting.com>
Jerry,

How Ctrl-G works is you first type a callsign in the Call field 
of the entry window. Then press Ctrl-G and it will go to that
call in the log. You can press Ctrl-G again to go to another 
occurrence of the call. 

This is clearly explained in the WL Help files as follows:

Goto a QSO
Using the Edit Goto QSO menu entry (or its keyboard shortcut CTRL+G)
searches through the logged QSOs for any call that contains the string in
the CALL field in the Entry window as a substring. (If you have more than
one Entry window open, the CALL field of the one that was active most
recently is used.) The search starts at the QSO following any highlighted
QSO, or at the first QSO in the log if none is highlighted. If a match is
found, the search stops at the match and highlights the matching QSO. 

For all callsign searches, if you have a "?" or a "*" character in the CALL
field, then WriteLog performs a more restricted search. With these
characters, a match occurs only if every character matches except that:
?
matches any single character
*
matches any string of zero or more characters.
If you enter only digits into the CALL field and type CTRL+G, then the log
window scrolls to the QSO of that number in the log.


> -----Original Message-----
> From: jpixton@shentel.net [mailto:jpixton@shentel.net] 
> Sent: February 20, 2004 7:21 AM
> To: doncassel@compuserve.com; writelog@contesting.com
> Subject: RE: [WriteLog] update on log scroll
> 
>  
> Don,
> 
> I just opened the wpx log on this computer while I read your 
> email. With the keyboard focus in the Call field of the entry 
> window, I press Ctl+G, and absolutely nothing happens! Since 
> Ctl+G is labeled "Go to QSO..." I would expect to be able to 
> enter a qso number into some dialog window - but there is no 
> window. If I place the cursor in the log window, selecting a 
> qso and then press Ctl+G the highlighting of the qso 
> disappears but again no input window.
> 
> Now if I try the "File, find callsign in files...", I do get 
> a dialog window into which I can type "ve3xd". But rather 
> than searching the current OPEN log, I get another dialog 
> window that says "Choose the file to search" 
> and if I then select the log that I am trying to search that 
> dialog window goes away but NOTHING else happens.
> 
> So here I have two capabilities that I assume would "scroll" 
> my log that do not work for me, and one that scrolls my log 
> when I least expect it to.?????
> 
> Very puzzling.
> 
> Jerry, W6IHG
> 
> 
> At 09:25 AM 2/19/2004 -0500, Don Cassel wrote:
> >  Jerry,
> >
> >I have never had this happen either and have used WL extensively for 
> >several years. However the action you are describing can be 
> invoked by 
> >pressing Ctrl-G which goes to the callsign in the log. Could you be 
> >having a keyboard issue of some kind that is creating the problem?
> >
> >73, Don VE3XD
> >
> > > -----Original Message-----
> > > From: writelog-bounces@contesting.com 
> > > [mailto:writelog-bounces@contesting.com] On Behalf Of Jerry Pixton
> > > Sent: February 19, 2004 7:39 AM
> > > To: writelog@contesting.com
> > > Subject: [WriteLog] update on log scroll
> > >
> > >
> > > All interested,
> > >
> > > I did a very fine scrub of the writelog.ini files that 
> were used on 
> > > my two computers during the wpx vs a clean install writelog.ini 
> > > (after saving configuration). I can find nothing that even looks 
> > > suspect that would cause the log window to scroll the log back to 
> > > (what I think is) the first contact with that station.
> > >
> > > Some have reported seeing this problem. Some say never. 
> So it's like 
> > > I have something turned on that I don't know about.
> > >
> > > So I don't have a solution yet. Perhaps a clue - I have 
> NEVER been 
> > > able to do a "find qso in log" search, or a "go to qso"
> > > function. These menu items DO NOT scroll the log to the 
> contact??????
> > >
> > > The next test is to take the wpx logs and see if as I add more 
> > > contacts on multiple bands I can see a pattern.
> > >
> > > Jerry, W6IHG
> > > ------------------------------------------
> > > Dr. Jerry R. Pixton, PIXOS Designs LLC 
> > > http://www.pixos.com/designs/RadioTuner/
> > > jpixton@shentel.net
> > > ------------------------------------------
> > >
> > >
> > > _______________________________________________
> > > WriteLog mailing list
> > > WriteLog@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/writelog
> > > WriteLog on the web:  http://www.writelog.com/
> > >
> >
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
> >WriteLog on the web:  http://www.writelog.com/
> 
> ------------------------------------------
> Dr. Jerry R. Pixton, PIXOS Designs LLC
> http://www.pixos.com/designs/RadioTuner/
> jpixton@shentel.net
> ------------------------------------------
> 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>