[WriteLog] CW keying via COM1 port help needed?

[Tim Lemmon <wk4u@mindspring.com>]

I am setting up a couple CW stations for Field Day this weekend.

After getting everything hooked up, the radio talks to the program just 
fine.  (I can see the current frequency I am tuned to on the computer 
screen), and I can configure the program to send CW via the COM1 
port.  Problem is, when it transmits, it only keys the rig, but doesn't 
actually transmit any RF.  The paddles hooked to each radio work 
fine.  Both rigs are in the CW mode with VOX turned on.  Both sets of comm 
cables have all 9 wires configured correctly.

Could I just be looking at an .INI file modification?

PLEASE don't flame me if this has been addressed in the past.  I looked at 
two months worth of archives and didn't find anything on this particular 
subject, and am helping a bigger Field Day group with these rigs

Thank you for your positive input.

-Tim, WK4U
wk4u@mindspring.com


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/