What sort of serial port do you have - built-in or are you using a USB <=>
serial port cable? If it's a cable then your symptoms are similar to those
others have experienced with 'inferior' cables.
Another option is that some - very few - Yaesu FT-8x7 have synchronisation
problems.
Simon Brown
---
www.sysgem.com www.hb9drv.ch www.laax.ch
----- Original Message -----
From: <halken@comcast.net>
> Having a problem reading an FT-897 on com1. When the port setting is set
> to auto, there is no communication. With the rig and WL set to 9600 or
> 4800 baud, there is communication but it is flaky. If I force the rig to
> TX, WL reads the freq okay, but on Rx, it often reads the wrong freq.
> Also, CW keying is okay out of com1 using alk-K but not the F keys.
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|