Hi Clive,
Go to Setup/Ports
In the left column you will see CW and your comports as circles you fill in.
Choose the port where you have WinKey assigned. If you have a port assigned to
Winkey that is higher than the ports displayed you'll have to edit your
Writelog.ini file in the windows directory. Ok back to the comport row. Choose
No Rig, Auto, check poll and Comm PTT yes. On the lower left check All mode
PTT on CW port RTS. In the CW Keyer type choose K1EL WinKey. And finally
you'll probably want PTT CW so click on CW PTT and choose On LPT pin
16/CommRTS. I use PTT to CW delay: of 10 msec. That should do it.
73 Art W2NRA
"Clive Whelan" <clive.whelan@btinternet.com> wrote:
>Well I finally got my DXdoubler to work with WL by running userport, and all
>the switching works FB. Also WL will key OK on the LPT port when computer
>keying is selected, so obviously the driver is working OK. However Winkey is
>not working despite having it selected in Ports etc. In fact I am at a loss
>to see how it could, because there doesn't seem to be anywhere to tell WL
>which COM port is controlling Winkey.
>
>Anyone been there?
>
>
>73
>
>
>Clive
>GW3NJW
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|