Mike and others,
At one time I thought the problem could be duplicated buy double hitting the
programmed Function Keys. I have a mild case of tremors in my hands and once
in awhile I would double hit a key or two keys at once and have the PTT
fail. Hitting the Escape Key to recover the PTT was the work-around for me.
Interesting though I have not noticed the problem as of late. Perhaps my eye
hand coordination has improved or the medication is working.
73 Eric.
-----Original Message-----
From: Mike
Sent: January 9, 2006 10:11 AM
To: writelog@contesting.com
Subject: [WriteLog] Intermittent PTT Dropout
Had a problem with PTT dropping out every now and then. Obviously,
noticed it most while CQing.
V10.55D is used but believe the problem has been around for a couple
of prior versions.
Using homemade (single transistor) interface and a 800 MHz computer,
with ~600 Mb RAM, running XP Home.
Noticed that sometimes, after the computer drops PTT while sending a
message, the computer would reactivate the PTT before the end of the
message and then repeat the message. Other times the message would
end without the computer generated repeat message. Also, if the
message was manually started after PTT dropout, but before the end of
the message, the computer would reactivate PTT and the rest of the
message would be sent as if PTT had not been dropped. The manually
started message would be sent immediately at the end of the first
message. The screen displays all of the first message, even the
section during PTT dropout. If the dropped PTT occurred during an
auto-CQ and not manually restarted, the next CQ would be started at
the correct time and the PTT would not drop-out in the second message.
Has others seen this problem? Any remedies?
73,
Mike, K4GMH
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|