Joe,
Thanks for the quick response. That is how I got the rig to work with
DX4WIN was by not using Request to send. That was a software setting
within DX4Win. I did not think of checking the FT2K manual.
Per your suggestion, I did change menu 29 RTS to off but still "no
rig". Anything else? you are using the 9000 rig setting right?
Thanks,
Jay - KT5E
Joe Subich, W4TV wrote:
> Jay,
>
> Add a jumper to pins 7&8 on the FT-2000 end of your serial
> cable (2,3,5 with jumper on rig end) or change the FT-2000
> menu #029 (CAT RTS) to OFF.
>
> 73,
>
> ... Joe, W4TV
>
>
>
>
>> -----Original Message-----
>> From: writelog-bounces@contesting.com
>> [mailto:writelog-bounces@contesting.com] On Behalf Of Jay Schwisow
>> Sent: Friday, January 26, 2007 4:44 PM
>> To: writelog@contesting.com
>> Subject: [WriteLog] FT 2000 with 10.61
>>
>>
>> I recently upgraded to 10.61 and am using a FT2000. I tried
>> setting up
>> the 9000 for the rig but I do not have communication between
>> wl and the
>> ft2k. Does anyone have this working? Anything I need to know?
>>
>> Thanks,
>>
>> Jay - KT5E
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>>
>>
>
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|