Richard,
I noted in another post you mentioned you use PC generated CW. Set-up with
the WinKey option try again.
I have run CW SO2R with the mH SO2R+ Keyer and don't remember your problem
when set-up with the WinKey option. I am pressed for time today, but as soon
as I can I will check your findings here and get back to you - most likely
direct if that is ok with you.
73 Eric.
> -----Original Message-----
> From: Richard L. King
> Sent: February 10, 2008 11:03 PM
>
> I need some help again to make something work on my MK2R+ with
> Writelog. I had this problem a year ago, but was told that it should
> work when Writelog implements support for the MK2R.
>
> Now I am running Writelog 10.65C that should have support for the
> MK2R but the problem is still there. Here is what happens.
>
> I have a CQ TEST in F1.
>
> I have "K5NA" in F4.
>
> I am running in SO2R mode and using auto repeat (3 seconds) and auto
> resume to send the F1 CQ on radio one.
>
> The headphones are switching and I am listening on radio two when
> transmitting on radio one.
>
> I use the "shift arrow" key to move the keyboard focus from radio one
> to radio two. Radio one continues to call CQ with the transmit focus
> still there.
>
> I decide to drop my call in on radio two using the F4 key.
>
> This is where things go wrong.
>
> When I hit F4, radio one only stops for an instant. The PTT switches
> to radio two and then immediately back to radio one. Nothing is sent
> on radio two even though the PTT was made briefly.
>
> Radio one has immediately started CQing again. When that CQ completes
> there is no pause and another CQ starts immediately. Then, finally,
> after the second CQ the 3 second delay will be injected between CQs
> again. Then it starts CQing normally with the 3 second delay
> between CQs again.
>
> With the auto CQ and auto resume on, I cannot send on the second
> radio by moving the keyboard focus there.
>
> Is there something that I have missed in the Router or Writelog that
> makes this work correctly? I have been playing with settings and
> reading material and I can't get any ideas.
>
> I am cross posting this to Microham in case it is a MK2R or
> Router issue.
>
> 73, Richard - K5NA
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|