WriteLog
[Top] [All Lists]

Re: [WriteLog] Audo recording problem

To: "Writelog Reflector" <writelog@contesting.com>
Subject: Re: [WriteLog] Audo recording problem
From: "Alan Marshall" <acmd@rcn.com>
Date: Fri, 8 Jan 2010 15:27:01 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Gary,

The Win7 cw recording worked as it does on XP.  It seems to have recorded 
fine with the setup as indicated below.

    -Alan, W1CCE

----- Original Message ----- 
From: "Alan Marshall" <acm@ultranet.com>
To: "Writelog Reflector" <writelog@contesting.com>
Sent: Friday, January 08, 2010 2:56 PM
Subject: Re: [WriteLog] Audo recording problem


> Gary and Don,
>
> I tried a new install of 10.69d on Win7 64 bit machine and found the same
> problem.  The bar graphs don't seem to work as they do on Win XP.  This 
> win7
> machine has never had Writelog installed on it before.  The 
> WLsbcontrol.exe
> program does control the audio level getting to the rttyrite window cw
> decoder but does not show anything on the bars of the SB control window. I
> will be checking out the recording of the sound in a bit to see if that is
> actually working...
>
> Currently it seems that the problem is in the SB Control program, not
> writelog.
>
>    Alan, W1CCE
>
>
> ----- Original Message ----- 
> From: "Gary AL9A" <al9a@mtaonline.net>
> To: "Writelog Reflector" <writelog@contesting.com>
> Sent: Friday, January 08, 2010 2:05 AM
> Subject: Re: [WriteLog] Audo recording problem
>
>
>> After getting Don's message below I decided to uninstall V10.74J and go
>> back
>> to V10.73D because the WL mixer control worked there last weekend.
>> Uninstalled 10.74J and installed 10.69D full install.  Started it up and
>> still no audio to the WL mixer control.  Did the update to 10.73D - still
>> no
>> audio making it into the WL mixer control.  Updated again back to 
>> 10.74J -
>> still no audio.  I think this eliminates the 10.74J update as the 
>> culprit.
>> Obviously I have something else going on here, but am lost as to what.
>>
>> With WL running, the Line LED on the MKII is lit and the vertical bar in
>> the
>> Sound Recording tab for the microHAM line CODEC is showing movement.
>> However, the WL mixer control is not getting any input from the MKII.  I
>> now
>> suspect Vista has once again reared it ugly head, but can't figure out
>> where
>> to find more info and make a setting change to get things right again.
>> This
>> is tedious - seems like every time I start WL under Vista it's a crap
>> shoot
>> as the whether or not the sound card will be allowed to function 
>> properly!
>>
>> 73,
>> Gary AL9A
>>
>>
>> ----- Original Message ----- 
>> From: "Don Bergmark" <dbergmark5@q.com>
>> To: "'Gary AL9A'" <al9a@mtaonline.net>
>> Sent: January 07, 2010 1:55 PM
>> Subject: RE: [WriteLog] Audo recording problem
>>
>>
>>> Hi Gary
>>>
>>> I have the same problem.  I have been playing around with this for 3 or 
>>> 4
>>> days now and am about ready to delete all of Writelog and start over.
>>> Let
>>> me know what the solution is.
>>>
>>> Don
>>> W9NGA
>>>
>>> -----Original Message-----
>>> From: writelog-bounces@contesting.com
>>> [mailto:writelog-bounces@contesting.com] On Behalf Of Gary AL9A
>>> Sent: Thursday, January 07, 2010 2:31 PM
>>> To: Writelog Reflector
>>> Subject: [WriteLog] Audo recording problem
>>>
>>> I'm checking out my setup for the NAQP CW contest Sat. and notice my WL
>>> Sound MIxer Level Control is not receiving any signals from the radio.
>>> I'm
>>> running a new IC-7600 with a MKII under Vista 32 bit.  All the Radio
>>> Audio
>>> settings are correctly set to the proper microHAM CODECs.  It worked 
>>> fine
>>> last weekend for the RTTY RU and I have made no changes to the cable
>>> hookups
>>>
>>> since then.  If I open the Sound window and click on the Recording tab I
>>> can
>>>
>>> see the vertical bar graph bouncing up and down in response to the
>>> received
>>> signal, but the vertical bar graph in the WL Mixer control is dead.  I
>>> can
>>> find nothing in the Vista Sound window indicating that something is
>>> muted.
>>> The only thing I can think of that is different from last weekend is 
>>> that
>>> updated WL itself to V10.74J.  Any suggestions appreciated.
>>>
>>> 73,
>>> Gary AL9A
>>>
>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web:  http://www.writelog.com/
>>>
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/ 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>