It appears that WriteLog 11.10G breaks something in the old MMTTY
plug-in. I suggest uninstalling the plug-in from the Control Panel
then starting WriteLog 11.10G, then selecting one of the Sound Board
options. After that you have two choices - you can install XMMT.ocx
and use MMTTY that way or you can close WriteLog 11.10G and reinstall
the old plug-in.
The old plug-in works if installed and configured *after* an upgrade
to 11.10G (as long as 11.10G is not reinstalled). I do recommend
rebooting after uninstalling the old plug-in to make sure any locked
files are released.
For anyone who has not already upgraded - set RTTYrite to one of
the sound board choices temporarily and uninstall the old MMTTY
plug-in before upgrading it will save you some headache.
73,
... Joe, W4TV
On 4/2/2013 10:53 AM, Jerry Pixton wrote:
Ed, et al
From the mail I think several of us are having the same problem with
11.10.
The basic problem is rttyrite freezes up when its tnc menu is touched.
I am just trying to get mmtty plug-in to work the same as it has for me
in 11.08.
This morning, I uninstalled 11.08 again (after making a backup) because
it went in the wrong directory yesterday.
I then installed 11.10 in c:\HamPrograms\Writelog\
I deleted the [rttyrite] and [rttyrite2] sections from the writelog.ini
in ...virtualStore... and saved it.
I then started writelog and opened a rttyrite window. Then selected
mmtty. Had to point to the proper directory (I did not reinstall mmtty).
The rtty control panel for mmtty opened.
But as soon as I try to go to TNC Setup to adjust the mmtty appearance,
rttyrite freezes!
When I also go to the Stereo Soundboard AFSK option, rttyrite freezes
(that was the original problem I had).
And somewhere along the line I had to reinstall the mmtty plugin because
I was getting errors messages about "failed to create custom ... tnc
header"
Also I have been unable to save the size and location of the rttyrite
window using the Save Configuration option.
I deleted the writelog.ini in ...virtualStore... to let writelog build a
new one. But that did not solve the problem.
So basically I can not get back to the configuration of mmtty that I had
with 11.08.
Any ideas???? Meanwhile I have regressed back to writelog 11.08
Someone commented re: cleaning the registry values. Is that necessary?
Jerry, W6IHG
On 4/1/2013 3:47 PM, Ed Muns wrote:
After installing 11.10G, try deleting all Rttyrite sections in
writelog.ini
and setup the Rttyrite windows again.
Ed W0YK
Jerry W6IHG wrote:
Has anyone else had a problem with 11.10 and changing TNCs?
Tried 11.10 yesterday (to try the new K3 rig driver), Windows
7, and the regular rttyrite/mmtty plugin windows I always
use. When I try to change the TNC from mmtty to Stereo Sound
Board AFSK to use the cw receiver, mmtty dies and I get a
rttyrite MFC error. Have to use the Task Manager to get back
to Writelog to start over.
Had to uninstall 11.10 and go back to 11.08 so mmtty plugin
would work.
What did I miss? I see all the chatter re 2Tone but nothing
that indicates that mmtty plug-in might not work??? I was
using the same writelog.ini file that I used with 11.08.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|