See the example configuration for WriteLog and your microHAM interface
available in Router (Help | Download Documents) or in the section for
your interface on-line at www.microHAM-USA.com/support.html.
If you have USB Interface II, USB Interface III, CW Keyer, Digikeyer
or Digikeyer II, make sure you have set the jumpers for the correct
levels (RS-232) as shown in the appropriate Users Manual.
73,
... Joe, W4TV
On 11/21/2013 6:22 PM, Magnus Aronsson wrote:
Hi
Trying to prepare for CQWW-CW and can not get my rig control to work
with my laptop and Writelog v11.
I use a USB keyer from Microham and have created COM port 1 and 2.
Use Com 1 for rig control and Com 2 for CW.
Set the rig in writelog for FTDX-5000.
CW transmit is working and I switched CW transmit between both port 1
and port 2 so ports are working - problem is, I do not get Writelog and
FTDX-5000 to speak to eachother with the CAT.
Any advice is most welcome.
73 de Magnus SM6WET
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|