Bob,
Could it be because the first Com5 line is broken - no equals?
Jerry, W6IHG
On 3/6/2014 4:23 PM, Bob-WB2COY wrote:
Bill,
Here is the portion of my Writelog.ini that pertains to the ICOM 756
ProIII....
Caveats:
I use different port numbers than you, so adjust accordingly. I use
COM5 for Radio Control via CI-V, COM4 for PTT and COM8 for FSK with a
TimeWave Navigator Interface.
Make sure that the CI-V Baud Rate in the RIG matches the Baud Rate in
the ini file (I use 19200).
Make sure that you haven't changed the CI-V address in the RIG (6Eh is
the default)
Set CI-V Transceive in the Rig to OFF
Set CI-V with IC-730 in the Rig to OFF
Not sure why the COM5: setting is in the [RIGS] area twice, but it
works, so I left it alone...
[PORTS]
CommSlot1=5
CommSlot2=6
CommSlot3=7
CommSlot4=8
dvktype=1
dvkport=4
cwtype=1
cwport=1
dvkstoploop=1
dvkechomic=1
Comm5RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
Comm5XmitControl=ALWAYS
Comm5Used=USED,POLL,53
CWPTTCONTROL=0
CWPTTDELAY=0
Com1:=9600,n,8,1
[RIGS]
Com5:19200,n,8,2
Icom IC-756PROIII=0x6e
Com5:=19200,n,8,2
I only use the PRO-III for Digital modes, so anything in the ini that
has to do with SSB or CW or Voice Recordings is whatever the default
settings are.
73 -Bob, WB2COY
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
.
--
----------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.shentel.net/pixosdesigns/RadioTuner
jpixton@shentel.net
----------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|