WriteLog
[Top] [All Lists]

Re: [WriteLog] RTTY macros and direct keyboard input

To: <writelog@contesting.com>
Subject: Re: [WriteLog] RTTY macros and direct keyboard input
From: "Gary AL9A" <al9a@mtaonline.net>
Date: Mon, 6 Jul 2015 20:49:31 -0800
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Ross,

Not sure where to start as the F keys in WriteLog do not need anything special to make them functional. You don't mention it, but what version of WL are you running? Have you found where the macros are programmed for the F keys? That would be at Setup/CW/RTTY/SSB messages... When you get there how many macro memory banks are there? Just CW and SSB, or CW, SSB and RTTY? If you only have CW and SSB the RTTY macros go into the CW memories. If you have CW, SSB and RTTY the default condition is the RTTY memories are programmed the same as the CW memories. You should edit the RTTY memories for the macros you want. Remember to include a " %E" at the end of each macro to turn off TX. See the Help manual section titled "CW and RTTY and Voice Memory Setup" for a description of all the various % commands used in macros.

As for sending with the keyboard press Alt+K to bring up a small window where you type your text to send manually. As soon as you hit Alt+K the radio should go into TX and send diddles until you start typing in text. Hit Alt+K at the end of your typing to close the window and turn off TX.

73,
Gary AL9A

-----Original Message----- From: Ross Biggar
Sent: July 06, 2015 6:13 PM
To: writelog@contesting.com
Subject: [WriteLog] RTTY macros and direct keyboard input

I am keen to try writelog for RTTY, but I have been trying to set up the macros, without any success. The keyboard function keys do not connect to writelog, (but once or twice while trying I have had F3 come up on RTTYrite with qrz qrz etc) however th is very seldom. None of the other function keys work. I know the function keys operate, as I have the macros in N1MM Logger using function keys, working perfectly.
So what is the trick to get the keys operating in writelog.?

Studying the help file, I should be able to input directly from the keyboard and have it sent, but when I try that nothing happens.
Again I know the keyboard works perfectly in all other programmes.

so advice please what am I missing or doing wrong.
Thanks
Ross
ZL1WN
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>