Yaesu
[Top] [All Lists]

Re: [Yaesu] FT920 and filters.

To: <Yaesu@contesting.com>
Subject: Re: [Yaesu] FT920 and filters.
From: "Joe Subich" <W4TV@subich.com>
Date: Sun, 5 Feb 2006 22:52:39 -0500
List-post: <mailto:yaesu@contesting.com>
Ryszard,

Check with W2VJN at INRAD (www.inrad.net).  George has filter
switching and cascading boards that will allow you to add
1.8KHz and 250 Hz filters to the FT-920.  With the added boards,
you can maintain your existing bandwidth and add the narrower
filters when needed which provides 16 poles of filtering in
the narrow mode.

73,

    ... Joe, W4TV


> -----Original Message-----
> From: yaesu-bounces@contesting.com
> [mailto:yaesu-bounces@contesting.com] On Behalf Of ddicky@gazeta.pl
> Sent: Sunday, February 05, 2006 3:19 PM
> To: yaesu@contesting.com
> Subject: [Yaesu] FT920 and filters.
>
>
> Hallo All,
> I am using Yaesu trx FT920. The trx has SSB filter 2,4 kHz and CW
> filter 500Hz. In the last CQ WW 160 Contest I had problem with the
> reception. My filters are too wide. I'il like to change my filter
> for CW 500 Hz on INRAD 250 Hz and SSB 2,4kHz on INRAD 1,8 kHz.
>
> Have you got any experience in this? How can I fix those filters? Is
> it possible to fix, on the board in FT 920, one filter on CW and one
> filter on SSB only? Can I replace YF116C (500 Hz) and XF8,2M filters
> (2,4KHz),installed on my board already, with INRAD filters?
>
>
>
> 73 de Ryszard
> SP6GPJ




_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu

<Prev in Thread] Current Thread [Next in Thread>