Re: [Amps] Screen current problem solved!

["Carl" <km1h@jeremy.mv.com>]

That RCA load was on the dirt and the meter, cable and elements were still 
in the fellows vehicle. He didnt even realize they went together as the load 
had a dummy element in the coupler.
Besides digging thru layers of junk on the ground Ive found lots still 
inside vehicles or cruising by hours later when it is now on display.
Carl
KM1H

----- Original Message ----- 
From: "Ian White" <gm3sek@ifwtech.co.uk>
To: "'Amps'" <amps@contesting.com>
Sent: Sunday, November 10, 2013 5:08 AM
Subject: Re: [Amps] Screen current problem solved!


> > But other intelligent people cruise gracefully through the flotsam and
> catch
> > the prizes.
> >
> > Carl
> > KM1H
> So you'll be the one with the funny walk, from looking <underneath> the
> flea market tables?
>
> The real bargains always come from traders who specialize in other areas
> of interest, and down on the floor is where the interesting stuff is
> most likely to be found.
>
>
> 73 from Ian GM3SEK
>
>
> > -----Original Message-----
> > From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Carl
> > Sent: 10 November 2013 02:43
> > To: Peter Voelpel; 'Amps'
> > Subject: Re: [Amps] Screen current problem solved!
> >
> > But other intelligent people cruise gracefully through the flotsam and
> catch
> > the prizes.
> >
> > Carl
> > KM1H
> >
> >
> > ----- Original Message -----
> > From: "Peter Voelpel" <dj7ww@t-online.de>
> > To: "'Amps'" <amps@contesting.com>
> > Sent: Saturday, November 09, 2013 9:23 PM
> > Subject: Re: [Amps] Screen current problem solved!
> >
> >
> > > Sometimes intelligent people avoid flea markets, not to be mixed up
> with
> > > the
> > > crowd.
> > >
> > > 73
> > > Peter
> > >
> > > -----Original Message-----
> > > From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Carl
> > >
> > > Been there done that and is why I bought a 3000 W CCS RCA load, built
> by
> > > Bird, with a tapered snout and rated to 1000 mc at a hamfest almost
> 30
> > > years
> > >
> > > ago.
> > > It included a seperate 5" wattmeter in a cabinet, and a set of  250
> and
> > > 1500W slugs for the 400-1200mc range, total of 4 elements. It works
> fine
> > > at
> > > 1296 with barely a tickle of VSWR and is still useable at 2304.
> > >
> > > All for $125 since others passed on it as they werent intelligent
> enough
> > > to
> > > realize it works fine at VHF and below also (-;  This was even before
> no
> > > coders and make believe Extras !!
> > >
> > > _______________________________________________
> > > Amps mailing list
> > > Amps@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/amps
> > >
> > >
> > > -----
> > > No virus found in this message.
> > > Checked by AVG - www.avg.com
> > > Version: 10.0.1432 / Virus Database: 3222/6323 - Release Date:
> 11/09/13
> > >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1432 / Virus Database: 3222/6323 - Release Date: 11/09/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps