[Amps] GS-35b Amplifier, Nuno Lopes, 2013/11/29

• Re: [Amps] GS-35b Amplifier, Alek Petkovic, 2013/11/30
• Re: [Amps] GS-35b Amplifier, jeff millar, 2013/11/30

[Amps] Bleeder resistor across screen grid terminal, John Lyles, 2013/11/29

• Re: [Amps] Bleeder resistor across screen grid terminal, Bill Turner, 2013/11/30

[Amps] Adhesive for plate choke?, iain macdonnell - N6ML, 2013/11/29

• Re: [Amps] Adhesive for plate choke?, Carl, 2013/11/30
• Re: [Amps] Adhesive for plate choke?, Bill Turner, 2013/11/30
• Re: [Amps] Adhesive for plate choke?, Mike, 2013/11/30
• Re: [Amps] Adhesive for plate choke?, Mike, 2013/11/30
  • Re: [Amps] Adhesive for plate choke?, iain macdonnell - N6ML, 2013/11/30
• Re: [Amps] Adhesive for plate choke?, peter chadwick, 2013/11/30

[Amps] Chinese FU-724F, Hsu, 2013/11/27

• Re: [Amps] Chinese FU-724F, gdaught6, 2013/11/29
  • Re: [Amps] Chinese FU-724F, Carl, 2013/11/30

[Amps] Discrepencies in Pi-net calculators, Jim Thomson, 2013/11/26

• Re: [Amps] Discrepencies in Pi-net calculators, Peter Voelpel, 2013/11/27

[Amps] Crimp connector die sizes, Hardy Landskov, 2013/11/24

• Re: [Amps] Crimp connector die sizes, Roger (K8RI), 2013/11/26

[Amps] Fan sounds like F-15, Vic K2VCO, 2013/11/24

• [Amps] FW: Fan sounds like F-15, Dave Trainor, 2013/11/26
  • Re: [Amps] FW: Fan sounds like F-15, Gary Smith, 2013/11/29
• Re: [Amps] Fan sounds like F-15, KA4INM, 2013/11/26

[Amps] Discrepencies in Pi-net calculators, Steve Flood, 2013/11/19

• Re: [Amps] Discrepencies in Pi-net calculators, Larry Benko, 2013/11/20
  • Re: [Amps] Discrepencies in Pi-net calculators, Steve Flood, 2013/11/20
    • Re: [Amps] Discrepencies in Pi-net calculators, Larry Benko, 2013/11/20
    • Re: [Amps] Discrepencies in Pi-net calculators, Steve Flood, 2013/11/20
    • Re: [Amps] Discrepencies in Pi-net calculators, Carl Clawson, 2013/11/21
    • Re: [Amps] Discrepencies in Pi-net calculators, Steve Flood, 2013/11/24
• Re: [Amps] Discrepencies in Pi-net calculators, Han Higasa, 2013/11/20
• Re: [Amps] Discrepencies in Pi-net calculators, Mike Waters, 2013/11/20
• Re: [Amps] Discrepencies in Pi-net calculators, peter chadwick, 2013/11/21

[Amps] Commander HF-1250 problem, doug ferguson, 2013/11/18

• Re: [Amps] Commander HF-1250 problem, Vic K2VCO, 2013/11/19
• Re: [Amps] Commander HF-1250 problem, Tom Osborne, 2013/11/19
• Re: [Amps] Commander HF-1250 problem, George, 2013/11/19
• [Amps] Commander HF-1250 problem, doug ferguson, 2013/11/19
  • Re: [Amps] Commander HF-1250 problem, Carl, 2013/11/19
• Re: [Amps] Commander HF-1250 problem, Hardy Landskov, 2013/11/19
• Re: [Amps] Commander HF-1250 problem, peter chadwick, 2013/11/19
  • Re: [Amps] Commander HF-1250 problem, Bill Turner, 2013/11/19
• [Amps] Commander HF-1250 problem, doug ferguson, 2013/11/19
• [Amps] Commander HF-1250 problem, doug ferguson, 2013/11/19
  • Re: [Amps] Commander HF-1250 problem, Bill Turner, 2013/11/19
    • Re: [Amps] Commander HF-1250 problem, Carl, 2013/11/19
    • Re: [Amps] Commander HF-1250 problem, Bill Turner, 2013/11/19
    • Re: [Amps] Commander HF-1250 problem, Carl, 2013/11/19
    • Re: [Amps] Commander HF-1250 problem, Louis Parascondola, 2013/11/19
    • Re: [Amps] Commander HF-1250 problem, Bill Turner, 2013/11/19
    • Re: [Amps] Commander HF-1250 problem, Carl, 2013/11/20
    • [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem), mgb , 2013/11/20
    • Re: [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem), Steve NR4M, 2013/11/20
    • Re: [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem), Bill Turner, 2013/11/20
    • Re: [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250problem), Carl, 2013/11/20
    • Re: [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem), Doug Renwick, 2013/11/20
    • Re: [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem), donroden, 2013/11/20
  • Re: [Amps] Commander HF-1250 problem, Carl, 2013/11/19
  • Re: [Amps] Commander HF-1250 problem, Gary Smith, 2013/11/21
    • Re: [Amps] Commander HF-1250 problem, Carl, 2013/11/24
• [Amps] Commander HF-1250 problem, doug ferguson, 2013/11/19
  • Re: [Amps] Commander HF-1250 problem, George, 2013/11/20

[Amps] Burn-in for GU84b?, Rich Hallman - N7TR, 2013/11/17

• Re: [Amps] Burn-in for GU84b?, Carl, 2013/11/18
  • Re: [Amps] Burn-in for GU84b?, Leigh Turner, 2013/11/18

[Amps] Ameritron AL-80A Restoration Project - need parts, Jack C. Shutt, 2013/11/17

• Re: [Amps] Ameritron AL-80A Restoration Project - need parts, ZL2AAA, 2013/11/17
  • Re: [Amps] Ameritron AL-80A Restoration Project - need parts, Alek Petkovic, 2013/11/17
  • Re: [Amps] Ameritron AL-80A Restoration Project - need parts, Jack C. Shutt, 2013/11/17

[Amps] Atricle on use and misuse of toroids, Bill Turner, 2013/11/16

• Re: [Amps] Atricle on use and misuse of toroids, Stu Ritter, 2013/11/17
  • Re: [Amps] Atricle on use and misuse of toroids, Bill Turner, 2013/11/18

[Amps] Chinese 4CX1000A from Alpha, Vic K2VCO, 2013/11/15

• Re: [Amps] Chinese 4CX1000A from Alpha, Gary K9GS, 2013/11/15
  • Re: [Amps] Chinese 4CX1000A from Alpha, Vic K2VCO, 2013/11/15
    • Re: [Amps] Chinese 4CX1000A from Alpha, Gary Smith, 2013/11/15
    • Re: [Amps] Chinese 4CX1000A from Alpha, Roger (K8RI), 2013/11/16
    • Re: [Amps] Chinese 4CX1000A from Alpha, Vic, K2VCO, 2013/11/16
    • Re: [Amps] Chinese 4CX1000A from Alpha, Roger (K8RI), 2013/11/16

[Amps] Passive grid stability calculation for a tetrode?, Markku Oksanen, 2013/11/15

• Re: [Amps] Passive grid stability calculation for a tetrode?, Bill Turner, 2013/11/15
  • Re: [Amps] Passive grid stability calculation for a tetrode?, Markku Oksanen, 2013/11/16
    • Message not available
    • Re: [Amps] Passive grid stability calculation for a tetrode?, Markku Oksanen, 2013/11/16
• Re: [Amps] Passive grid stability calculation for a tetrode?, peter chadwick, 2013/11/15
  • Re: [Amps] Passive grid stability calculation for a tetrode?, Carl, 2013/11/15
    • Re: [Amps] Passive grid stability calculation for a tetrode?, donroden, 2013/11/15
    • Re: [Amps] Passive grid stability calculation for a tetrode?, Carl, 2013/11/15
    • Re: [Amps] Passive grid stability calculation for a tetrode?, Fuqua, Bill L, 2013/11/15
• Re: [Amps] Passive grid stability calculation for a tetrode?, peter chadwick, 2013/11/15
• Re: [Amps] Passive grid stability calculation for a tetrode?, peter chadwick, 2013/11/15
  • Re: [Amps] Passive grid stability calculation for a tetrode?, Fuqua, Bill L, 2013/11/15
• Re: [Amps] Passive grid stability calculation for a tetrode?, Markku Oksanen, 2013/11/15
• Re: [Amps] Passive grid stability calculation for a tetrode?, TexasRF, 2013/11/20
• Re: [Amps] Passive grid stability calculation for a tetrode?, peter chadwick, 2013/11/20

[Amps] Chimney solved - now what about SSB/CW switch?, rick darwicki, 2013/11/14

• Re: [Amps] Chimney solved - now what about SSB/CW switch?, Carl, 2013/11/14

Re: [Amps] UHF connector discussion For Dummies, TexasRF, 2013/11/14

• Re: [Amps] UHF connector discussion For Dummies, David Kirkby, 2013/11/14
  • Re: [Amps] UHF connector discussion For Dummies, donroden, 2013/11/14
  • Re: [Amps] UHF connector discussion For Dummies, Glen Zook, 2013/11/14
• Re: [Amps] UHF connector discussion For Dummies, peter chadwick, 2013/11/14

Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work a..., TexasRF, 2013/11/14

• Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work a..., David Kirkby, 2013/11/14
• Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work a..., TexasRF, 2013/11/14

Re: [Amps] UHF CONNECTORS AND CRIMP DIES, Gregory Beat, 2013/11/14

• Re: [Amps] UHF CONNECTORS AND CRIMP DIES, Paul Christensen, 2013/11/14

[Amps] All the recent UHF connector discussion, Larry Benko, 2013/11/13

• Re: [Amps] All the recent UHF connector discussion, David Cole, 2013/11/13
• Re: [Amps] All the recent UHF connector discussion, David Kirkby, 2013/11/13
  • [Amps] UHF connector discussion For Dummies, Charles Harpole, 2013/11/13
    • Re: [Amps] UHF connector discussion For Dummies, David Kirkby, 2013/11/13
    • Re: [Amps] UHF connector discussion For Dummies, Jim W7RY, 2013/11/13
    • Re: [Amps] UHF connector discussion For Dummies, David Kirkby, 2013/11/14
  • Re: [Amps] All the recent UHF connector discussion, Larry Benko, 2013/11/13
    • Re: [Amps] All the recent UHF connector discussion, David Kirkby, 2013/11/13
    • Re: [Amps] All the recent UHF connector discussion, Carl, 2013/11/14
• Re: [Amps] All the recent UHF connector discussion, Carl, 2013/11/13
  • Re: [Amps] All the recent UHF connector discussion, Jim Brown, 2013/11/13

[Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, WK1W Ivan Shapiro, 2013/11/13

• Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, N1BUG, 2013/11/13
  • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Paul Christensen, 2013/11/13
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Pete Raymond, 2013/11/13
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Drax Felton, 2013/11/13
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, donroden, 2013/11/13
    • Message not available
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Hardy Landskov, 2013/11/13
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Charles Harpole, 2013/11/13
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Carl, 2013/11/13
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Bill Turner, 2013/11/14
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Roger (K8RI), 2013/11/14
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Pete Raymond, 2013/11/13
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Bill Turner, 2013/11/14
    • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Roger (K8RI), 2013/11/14
• Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Paul Christensen, 2013/11/13
• Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Paul Christensen, 2013/11/13
• Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Roger (K8RI), 2013/11/13
• Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, WK1W Ivan Shapiro, 2013/11/13
  • Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Pete Raymond, 2013/11/13

[Amps] meter behavior, Steve Flood, 2013/11/13

• Re: [Amps] meter behavior, Louis Parascondola, 2013/11/13
  • Re: [Amps] meter behavior, Paul Christensen, 2013/11/13
  • Re: [Amps] meter behavior, Carl, 2013/11/13
• Re: [Amps] meter behavior, David Kirkby, 2013/11/13
• Re: [Amps] meter behavior, Dan Michnay, 2013/11/13
  • Re: [Amps] meter behavior, Fuqua, Bill L, 2013/11/13

[Amps] Remote monitoring of SSPA, Conrad Farlow, 2013/11/13

• Re: [Amps] Remote monitoring of SSPA, donroden, 2013/11/13
• Re: [Amps] Remote monitoring of SSPA, dsolberg, 2013/11/13
• Re: [Amps] Remote monitoring of SSPA, Manfred Mornhinweg, 2013/11/13

Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., peter chadwick, 2013/11/11

• Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Roger (K8RI), 2013/11/12
• Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., peter chadwick, 2013/11/14

Re: [Amps] UHF Connectors, peter chadwick, 2013/11/11

• Re: [Amps] UHF Connectors, peter chadwick, 2013/11/11
• Re: [Amps] UHF Connectors, peter chadwick, 2013/11/12
  • Re: [Amps] UHF Connectors, Jim Brown, 2013/11/12
    • Re: [Amps] UHF Connectors, David Cole, 2013/11/12
    • Re: [Amps] UHF Connectors, Peter Voelpel, 2013/11/12
    • Re: [Amps] UHF Connectors, Roger (K8RI), 2013/11/13
    • Re: [Amps] UHF Connectors, Carl, 2013/11/13

[Amps] Small vertical ceramic slug type trimmer, rick darwicki, 2013/11/10

• Re: [Amps] Small vertical ceramic slug type trimmer, Jim W7RY, 2013/11/11

[Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., KA4INM, 2013/11/10

• Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Charles Harpole, 2013/11/11
  • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Roger (K8RI), 2013/11/11
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., N1BUG, 2013/11/11
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Carl, 2013/11/11
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Peter Voelpel, 2013/11/11
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Fuqua, Bill L, 2013/11/11
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Drax Felton, 2013/11/11
    • [Amps] UHF Connectors, Jim Brown, 2013/11/11
    • Re: [Amps] UHF Connectors, Fuqua, Bill L, 2013/11/11
    • Re: [Amps] UHF Connectors, Roger (K8RI), 2013/11/12
    • Re: [Amps] UHF Connectors, Glen Zook, 2013/11/12
    • Re: [Amps] UHF Connectors, qrv@kd4e.com, 2013/11/12
    • Re: [Amps] UHF Connectors, Jim Brown, 2013/11/12
    • Re: [Amps] UHF Connectors, Ian White, 2013/11/12
    • Re: [Amps] UHF Connectors, Bill Turner, 2013/11/13
    • Re: [Amps] UHF Connectors, Roger (K8RI), 2013/11/13
    • Re: [Amps] UHF Connectors, Paul Christensen, 2013/11/13
    • Re: [Amps] UHF Connectors, Roger (K8RI), 2013/11/13
    • Re: [Amps] UHF Connectors, Paul Christensen, 2013/11/13
    • Re: [Amps] UHF Connectors, Bill Turner, 2013/11/12
    • Re: [Amps] UHF Connectors, Carl, 2013/11/12
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Dr. David Kirkby, 2013/11/13
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Roger (K8RI), 2013/11/11
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Carl, 2013/11/11
    • [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..**, Louis Parascondola, 2013/11/12
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..**, Carl, 2013/11/12
    • Message not available
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Hardy Landskov, 2013/11/13
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., David Kirkby, 2013/11/14
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Fuqua, Bill L, 2013/11/14
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., David Kirkby, 2013/11/14
    • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Jim W7RY, 2013/11/14
  • Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Peter Voelpel, 2013/11/11

[Amps] How much power through a BNC connector?, Bill Putney, 2013/11/10

• Re: [Amps] How much power through a BNC connector?, Carl, 2013/11/10

[Amps] Best source for Gigavac GH-1 ?, Jim Thomson, 2013/11/10

• Re: [Amps] Best source for Gigavac GH-1 ?, Carl, 2013/11/10
  • Re: [Amps] Best source for Gigavac GH-1 ?, Jim W7RY, 2013/11/11
    • Re: [Amps] Best source for Gigavac GH-1 ?, Paul Christensen, 2013/11/11
    • Re: [Amps] Best source for Gigavac GH-1 ?, Jim W7RY, 2013/11/11
    • Re: [Amps] Best source for Gigavac GH-1 ?, Jim Garland, 2013/11/11

[Amps] Looking for picture of SB220 interlock switch, Jim Thomson, 2013/11/10

• Re: [Amps] Looking for picture of SB220 interlock switch, donroden, 2013/11/10

[Amps] Measuring IMD, Jim Thomson, 2013/11/10

• Re: [Amps] Measuring IMD, Carl, 2013/11/10

[Amps] Best source for Gigavac GH-1 ?, John, 2013/11/09

• Re: [Amps] Best source for Gigavac GH-1 ?, Robert Morris, 2013/11/09
  • Re: [Amps] Best source for Gigavac GH-1 ?, MU 4CX250B, 2013/11/09
    • Re: [Amps] Best source for Gigavac GH-1 ?, Jim Brown, 2013/11/09
    • Re: [Amps] Best source for Gigavac GH-1 ?, Bill Turner, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, Karl-Arne Markström, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, Larry Benko, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, Jim Brown, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, Paul Christensen, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, Jim Brown, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, Larry Benko, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, MU 4CX250B, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, Larry Benko, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, Jim W7RY, 2013/11/11
    • Re: [Amps] Best source for Gigavac GH-1 ?, Jim Garland, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, Vic K2VCO, 2013/11/10
    • Re: [Amps] Best source for Gigavac GH-1 ?, Carl, 2013/11/10
• Re: [Amps] Best source for Gigavac GH-1 ?, Mike McCarthy, W1NR, 2013/11/09
  • Re: [Amps] Best source for Gigavac GH-1 ?, Jim Barber, 2013/11/09
• Re: [Amps] Best source for Gigavac GH-1 ?, peter chadwick, 2013/11/10
• Re: [Amps] Best source for Gigavac GH-1 ?, peter chadwick, 2013/11/10

[Amps] Plate Choke question, Steve Flood, 2013/11/09

• Re: [Amps] Plate Choke question, Carl, 2013/11/09
• Re: [Amps] Plate Choke question, peter chadwick, 2013/11/09
  • Re: [Amps] Plate Choke question, Leigh Turner, 2013/11/09
  • Message not available
    • Re: [Amps] Plate Choke question, Hardy Landskov, 2013/11/09
  • Re: [Amps] Plate Choke question, Carl, 2013/11/09
• Re: [Amps] Plate Choke question, peter chadwick, 2013/11/10
  • Re: [Amps] Plate Choke question, Carl, 2013/11/10
    • Re: [Amps] Plate Choke question, Steve Flood, 2013/11/10
    • Re: [Amps] Plate Choke question, Carl, 2013/11/10
• Re: [Amps] Plate Choke question, peter chadwick, 2013/11/10
  • Re: [Amps] Plate Choke question, Carl, 2013/11/10
• Re: [Amps] Plate Choke question, peter chadwick, 2013/11/10
  • Re: [Amps] Plate Choke question, Carl, 2013/11/10

[Amps] Screen current problem solved!, Vic K2VCO, 2013/11/09

• Re: [Amps] Screen current problem solved!, Carl, 2013/11/09
  • Re: [Amps] Screen current problem solved!, Roger (K8RI), 2013/11/09
  • Re: [Amps] Screen current problem solved!, Peter Voelpel, 2013/11/09
    • Re: [Amps] Screen current problem solved!, Carl, 2013/11/09
    • Re: [Amps] Screen current problem solved!, Jim Barber, 2013/11/09
    • Re: [Amps] Screen current problem solved!, Louis Parascondola, 2013/11/10
    • Re: [Amps] Screen current problem solved!, Carl, 2013/11/10
    • Re: [Amps] Screen current problem solved!, Ian White, 2013/11/10
    • Re: [Amps] Screen current problem solved!, Carl, 2013/11/10

[Amps] Autek WM-1 Schematic or Help, Jim W7RY, 2013/11/09

• Re: [Amps] Autek WM-1 Schematic or Help, Bill Turner, 2013/11/09
• Re: [Amps] Autek WM-1 Schematic or Help, Réjean Léveillé, 2013/11/09
• [Amps] Autek WM-1 Schematic or Help, Jim W7RY, 2013/11/09
  • Re: [Amps] Autek WM-1 Schematic or Help, Jim W7RY, 2013/11/09
    • Re: [Amps] Autek WM-1 Schematic or Help, Jim W7RY, 2013/11/10
• Re: [Amps] Autek WM-1 Schematic or Help, peter chadwick, 2013/11/09

[Amps] Alpha chimneys, Vic K2VCO, 2013/11/08

• Re: [Amps] Alpha chimneys, Jim W7RY, 2013/11/08
• Re: [Amps] Alpha chimneys, Jim Barber, 2013/11/08
  • Re: [Amps] Alpha chimneys, Carl, 2013/11/08

[Amps] Question for the tetrode experts, Vic K2VCO, 2013/11/07

• Re: [Amps] Question for the tetrode experts, Carl, 2013/11/07
  • Re: [Amps] Question for the tetrode experts, Fuqua, Bill L, 2013/11/07
• Re: [Amps] Question for the tetrode experts, Roger (K8RI), 2013/11/07
• Re: [Amps] Question for the tetrode experts, Jim W7RY, 2013/11/08
  • Re: [Amps] Question for the tetrode experts, Vic K2VCO, 2013/11/08
    • Re: [Amps] Question for the tetrode experts, Carl, 2013/11/08
    • Re: [Amps] Question for the tetrode experts, donroden, 2013/11/08
    • Re: [Amps] Question for the tetrode experts, Carl, 2013/11/08
    • Re: [Amps] Question for the tetrode experts, Jim W7RY, 2013/11/08
    • Re: [Amps] Question for the tetrode experts, Bill Turner, 2013/11/08
    • Re: [Amps] Question for the tetrode experts, N1BUG, 2013/11/08
    • Re: [Amps] Question for the tetrode experts, Vic K2VCO, 2013/11/08
    • Re: [Amps] Question for the tetrode experts, Peter Voelpel, 2013/11/08
    • Re: [Amps] Question for the tetrode experts, Vic K2VCO, 2013/11/08
    • Re: [Amps] Question for the tetrode experts, Carl, 2013/11/08
• Re: [Amps] Question for the tetrode experts, TexasRF, 2013/11/07
  • Re: [Amps] Question for the tetrode experts, Vic K2VCO, 2013/11/07
• Re: [Amps] Question for the tetrode experts, peter chadwick, 2013/11/08
• Re: [Amps] Question for the tetrode experts, peter chadwick, 2013/11/08
  • Re: [Amps] Question for the tetrode experts, Vic K2VCO, 2013/11/08

Re: [Amps] [RTTY] AL-1500 on RTTY, Bill Turner, 2013/11/07

• Re: [Amps] [RTTY] AL-1500 on RTTY, Carl, 2013/11/07
  • Re: [Amps] [RTTY] AL-1500 on RTTY, Louis Parascondola, 2013/11/07

[Amps] Yaesu FT-2000 "TX-INH" Spec?, Bill Putney, 2013/11/07

• Re: [Amps] Yaesu FT-2000 "TX-INH" Spec?, Paul Christensen, 2013/11/07
• Re: [Amps] Yaesu FT-2000 "TX-INH" Spec?, Jim W7RY, 2013/11/08

[Amps] FAN SPEED, Edwin Karl, 2013/11/07

• Re: [Amps] FAN SPEED, Carl, 2013/11/07

[Amps] [amps] West Coast Handbook, Gregory Beat, 2013/11/06

• Re: [Amps] [amps] West Coast Handbook, Roger (K8RI), 2013/11/06
• Re: [Amps] [amps] West Coast Handbook, k7fm, 2013/11/06
• Re: [Amps] [amps] West Coast Handbook, Don Ruokonen, 2013/11/07
  • Re: [Amps] [amps] West Coast Handbook, Richard Solomon, 2013/11/07
    • Re: [Amps] [amps] West Coast Handbook, Jim W7RY, 2013/11/08

[Amps] AL-1500 fan speed switching, rick darwicki, 2013/11/06

• Re: [Amps] AL-1500 fan speed switching, Réjean Léveillé, 2013/11/07
  • Re: [Amps] AL-1500 fan speed switching, Alek Petkovic, 2013/11/07
    • Re: [Amps] AL-1500 fan speed switching, Jim W7RY, 2013/11/08

[Amps] Chinese 15KV 2A rectifier modules?, Jim Barber, 2013/11/06

• Re: [Amps] Chinese 15KV 2A rectifier modules?, Dr. David Kirkby, 2013/11/08
  • Re: [Amps] Chinese 15KV 2A rectifier modules?, Jim Barber, 2013/11/06
    • Re: [Amps] Chinese 15KV 2A rectifier modules?, Jim W7RY, 2013/11/06
    • Re: [Amps] Chinese 15KV 2A rectifier modules?, Gary K9GS, 2013/11/07
• Re: [Amps] Chinese 15KV 2A rectifier modules?, peter chadwick, 2013/11/07

[Amps] where to begin, Gustavo LU6AGV, 2013/11/06

• Re: [Amps] where to begin, Bill Turner, 2013/11/06
  • Re: [Amps] where to begin, Roger (K8RI), 2013/11/06
    • Re: [Amps] where to begin, Gustavo LU6AGV, 2013/11/07
    • Re: [Amps] where to begin, Ulf (SM0NOR), 2013/11/07
    • Re: [Amps] where to begin, Alek Petkovic, 2013/11/07
    • Re: [Amps] where to begin, Joe Subich, W4TV, 2013/11/07
    • Re: [Amps] where to begin, Alek Petkovic, 2013/11/07
    • Re: [Amps] where to begin, Carl, 2013/11/07
    • Re: [Amps] where to begin, Louis Parascondola, 2013/11/07
    • Re: [Amps] where to begin, Richard Solomon, 2013/11/07
    • Re: [Amps] where to begin, Alek Petkovic, 2013/11/07
    • Re: [Amps] where to begin, Carl, 2013/11/07
    • Re: [Amps] where to begin, Vic K2VCO, 2013/11/07
    • [Amps] Question on soft start board location on a SB1000, Mike Krzystyniak, 2013/11/07
    • Re: [Amps] Question on soft start board location on a SB1000, Bill Turner, 2013/11/07
    • Re: [Amps] Question on soft start board location on a SB1000, Jim W7RY, 2013/11/08

[Amps] AL-82 opinions, Pete Smith N4ZR, 2013/11/06

• Re: [Amps] AL-82 opinions, Bill Turner, 2013/11/06
  • Re: [Amps] AL-82 opinions, Carl, 2013/11/06
    • Re: [Amps] AL-82 opinions, Bill Turner, 2013/11/06
• Re: [Amps] AL-82 opinions, David Cole, 2013/11/06
  • Re: [Amps] AL-82 opinions, Bill Turner, 2013/11/06
    • Re: [Amps] AL-82 opinions, David Cole, 2013/11/06
    • Re: [Amps] AL-82 opinions, Paul Christensen, 2013/11/07
  • Re: [Amps] AL-82 opinions, Carl, 2013/11/07
    • Re: [Amps] AL-82 opinions, David Cole, 2013/11/07
    • Re: [Amps] AL-82 opinions, Carl, 2013/11/07
    • Re: [Amps] AL-82 opinions, David Cole, 2013/11/07
    • Re: [Amps] AL-82 opinions, Carl, 2013/11/07
    • Re: [Amps] AL-82 opinions, Réjean Léveillé, 2013/11/09

[Amps] Looking for picture of SB220 interlock switch, Geert Jan de Groot, 2013/11/06

• Re: [Amps] Looking for picture of SB220 interlock switch, Carl, 2013/11/06
  • Re: [Amps] Looking for picture of SB220 interlock switch, Joe Subich, W4TV, 2013/11/06
    • Re: [Amps] Looking for picture of SB220 interlock switch, Carl, 2013/11/07
    • Re: [Amps] Looking for picture of SB220 interlock switch, Joe Subich, W4TV, 2013/11/07
    • Re: [Amps] Looking for picture of SB220 interlock switch, Carl, 2013/11/07
    • Re: [Amps] Looking for picture of SB220 interlock switch, Joe Subich, W4TV, 2013/11/07
    • Re: [Amps] Looking for picture of SB220 interlock switch, Carl, 2013/11/07
    • Re: [Amps] Looking for picture of SB220 interlock switch, donroden, 2013/11/08

[Amps] Initial RF testing of 4CX1000A amplifier, Vic K2VCO, 2013/11/05

• Re: [Amps] Initial RF testing of 4CX1000A amplifier, Vic Rosenthal, 2013/11/05
• Re: [Amps] Initial RF testing of 4CX1000A amplifier, Bill Turner, 2013/11/05
  • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Vic K2VCO, 2013/11/05
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Carl, 2013/11/05
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Ian White, 2013/11/06
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Bill Turner, 2013/11/06
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Ian White, 2013/11/06
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Bill Turner, 2013/11/06
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Fuqua, Bill L, 2013/11/06
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Carl, 2013/11/06
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Carl, 2013/11/06
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Ian White, 2013/11/06
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Peter Voelpel, 2013/11/06
    • Message not available
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Peter Voelpel, 2013/11/06
• Re: [Amps] Initial RF testing of 4CX1000A amplifier, TexasRF, 2013/11/06
• Re: [Amps] Initial RF testing of 4CX1000A amplifier, TexasRF, 2013/11/06
  • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Robert Morris, 2013/11/06
    • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Joe Subich, W4TV, 2013/11/06
    • [Amps] re alpha 8410 amplifier query, Fern, 2013/11/24
  • Re: [Amps] Initial RF testing of 4CX1000A amplifier, Bill Turner, 2013/11/06

[Amps] Making a broadband transformer, Bill Turner, 2013/11/03

• Re: [Amps] Making a broadband transformer, Mike Waters, 2013/11/05
  • Re: [Amps] Making a broadband transformer, Bill Turner, 2013/11/05
    • Re: [Amps] Making a broadband transformer, Saandy, 2013/11/06
    • Re: [Amps] Making a broadband transformer, Bill Turner, 2013/11/06
• Re: [Amps] Making a broadband transformer, Mike Waters, 2013/11/05

[Amps] Measuring IMD, Bill Turner, 2013/11/02

• Re: [Amps] Measuring IMD, Leigh Turner, 2013/11/02
  • [Amps] re alpha 8410, Fern, 2013/11/24
• Re: [Amps] Measuring IMD, Jim Brown, 2013/11/02
  • Re: [Amps] Measuring IMD, Karl-Arne Markström, 2013/11/02
    • Re: [Amps] Measuring IMD, Fuqua, Bill L, 2013/11/02
    • Re: [Amps] Measuring IMD, Jeff Blaine, 2013/11/02
    • Re: [Amps] Measuring IMD, Jim Barber, 2013/11/02
    • Re: [Amps] Measuring IMD, Fuqua, Bill L, 2013/11/02
  • Re: [Amps] Measuring IMD, Carl, 2013/11/03
• Re: [Amps] Measuring IMD, Bill Turner, 2013/11/02
  • Re: [Amps] Measuring IMD, Chris Wilson, 2013/11/02
• Re: [Amps] Measuring IMD, Manfred Mornhinweg, 2013/11/02
• Re: [Amps] Measuring IMD, peter chadwick, 2013/11/03
  • Re: [Amps] Measuring IMD, Karl-Arne Markström, 2013/11/03
    • Re: [Amps] Measuring IMD, Jim Barber, 2013/11/03
    • Re: [Amps] Measuring IMD, Karl-Arne Markström, 2013/11/03
    • Re: [Amps] Measuring IMD, Jim W7RY, 2013/11/03
• Re: [Amps] Measuring IMD, Colin Lamb, 2013/11/03
  • Re: [Amps] Measuring IMD, Peter Voelpel, 2013/11/03
  • Re: [Amps] Measuring IMD, Jim Barber, 2013/11/03
    • Re: [Amps] Measuring IMD, Richard Solomon, 2013/11/03
• Re: [Amps] Measuring IMD, peter chadwick, 2013/11/03
• Re: [Amps] Measuring IMD, Manfred Mornhinweg, 2013/11/03
• Re: [Amps] Measuring IMD, peter chadwick, 2013/11/03
  • Re: [Amps] Measuring IMD, Jim Barber, 2013/11/03
• Re: [Amps] Measuring IMD, peter chadwick, 2013/11/03
  • Re: [Amps] Measuring IMD, Dave Trainor, 2013/11/03
    • Re: [Amps] Measuring IMD, Robert Groh, 2013/11/04
    • Re: [Amps] Measuring IMD, Carl, 2013/11/04
    • Re: [Amps] Measuring IMD, Fuqua, Bill L, 2013/11/04
• Re: [Amps] Measuring IMD, Steef, 2013/11/08

Re: [Amps] TL922 on 12/17, Jeff Blaine, 2013/11/01

• [Amps] TL922 on 12/17, Jeff Blaine, 2013/11/05
  • Re: [Amps] TL922 on 12/17, Vic Rosenthal, 2013/11/05
    • Re: [Amps] TL922 on 12/17, Jeff Blaine, 2013/11/05

[Amps] AL-1500 Problems, rick darwicki, 2013/11/01

• Re: [Amps] AL-1500 Problems, Al Kozakiewicz, 2013/11/01

[Amps] Large Variac controlling HV power supply, Jim Thomson, 2013/11/01

• Re: [Amps] Large Variac controlling HV power supply, wt8r, 2013/11/01
  • Re: [Amps] Large Variac controlling HV power supply, donroden, 2013/11/01
• [Amps] NEW 3CX1500A7/8877 FOR SALE, wt8r, 2013/11/01

Re: [Amps]  GS23B Plate load resistance for HF, peter chadwick, 2013/11/01

• Re: [Amps]  GS23B Plate load resistance for HF, Jim Thomson, 2013/11/01
  • Re: [Amps]  GS23B Plate load resistance for HF, Carl, 2013/11/01