Amps Mailing List (date)

Amps Mailing List (date)

[Thread Index] [Top] [All Lists]

November 30, 2013

[Amps] AL-1500 PROIII SteppIR, rick darwicki, 13:45
Re: [Amps] GS-35b Amplifier, jeff millar, 13:45
Re: [Amps] Adhesive for plate choke?, iain macdonnell - N6ML, 13:44
Re: [Amps] Adhesive for plate choke?, Mike, 13:44
Re: [Amps] Adhesive for plate choke?, Mike, 13:44
Re: [Amps] GS-35b Amplifier, Alek Petkovic, 13:44
Re: [Amps] Adhesive for plate choke?, Bill Turner, 13:44
Re: [Amps] Bleeder resistor across screen grid terminal, Bill Turner, 13:44
Re: [Amps] Adhesive for plate choke?, peter chadwick, 13:44
Re: [Amps] Adhesive for plate choke?, Carl, 13:44
Re: [Amps] Chinese FU-724F, Carl, 13:44

November 29, 2013

[Amps] GS-35b Amplifier, Nuno Lopes, 10:39
[Amps] Bleeder resistor across screen grid terminal, John Lyles, 10:39
[Amps] Adhesive for plate choke?, iain macdonnell - N6ML, 10:39
Re: [Amps] Chinese FU-724F, gdaught6, 10:38
Re: [Amps] FW: Fan sounds like F-15, Gary Smith, 10:38

November 27, 2013

[Amps] Fw: Crimp connector die sizes, Hardy Landskov, 08:46
[Amps] Chinese FU-724F, Hsu, 08:46
[Amps] RF Industries Crimp Dies, Gregory Beat, 08:46
Re: [Amps] Discrepencies in Pi-net calculators, Peter Voelpel, 08:46

November 26, 2013

[Amps] Command Technologies HF-2500, Brian Sarkisian, KG8CO, 12:17
[Amps] Amps :Kenwood TL922 bandswitch replacement : spare part, Behiels JeanPierre, 11:54
[Amps] UT-300C-25 semi rigid, Conrad Farlow, 11:54
[Amps] Discrepencies in Pi-net calculators, Jim Thomson, 11:54
[Amps] Replacement Fan Motor for Drake L-4B, Russ Williams, 11:54
[Amps] Alpha 77D amp question, Louis Parascondola, 11:54
Re: [Amps] [AMPS] Commander HF-1250 problem, art421, 11:54
[Amps] Fan control, Alf Pousar, 11:54
Re: [Amps] Crimp connector die sizes, Roger (K8RI), 11:54
[Amps] Command Technologies HF2500, Brian Sarkisian, KG8CO, 11:54
Re: [Amps] Fan sounds like F-15, KA4INM, 11:54
[Amps] FW: Fan sounds like F-15, Dave Trainor, 11:54

November 24, 2013

[Amps] Crimp connector die sizes, Hardy Landskov, 14:39
[Amps] Solid State Amplifiers, Richard Solomon, 14:39
[Amps] re alpha 8410, Fern, 14:39
[Amps] re alpha 8410 amplifier query, Fern, 14:38
Re: [Amps] Discrepencies in Pi-net calculators, Steve Flood, 14:38
Re: [Amps] Commander HF-1250 problem, Carl, 14:38
[Amps] Fan sounds like F-15, Vic K2VCO, 14:38

November 21, 2013

Re: [Amps] Discrepencies in Pi-net calculators, peter chadwick, 10:13
Re: [Amps] Commander HF-1250 problem, Gary Smith, 10:13
Re: [Amps] Discrepencies in Pi-net calculators, Carl Clawson, 10:13

November 20, 2013

Re: [Amps] Discrepencies in Pi-net calculators, Steve Flood, 21:58
Re: [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem), donroden, 21:07
Re: [Amps] Discrepencies in Pi-net calculators, Larry Benko, 20:53
Re: [Amps] Discrepencies in Pi-net calculators, Steve Flood, 18:38
Re: [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250problem), Carl, 17:42
Re: [Amps] Discrepencies in Pi-net calculators, Han Higasa, 17:08
Re: [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem), Doug Renwick, 16:48
Re: [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem), Bill Turner, 14:43
Re: [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem), Steve NR4M, 14:37
[Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem), mgb , 12:44
Re: [Amps] Discrepencies in Pi-net calculators, Mike Waters, 12:20
Re: [Amps] Commander HF-1250 problem, Carl, 12:06
Re: [Amps] Commander HF-1250 problem, George, 08:23
[Amps] PW1 and Quadra voltage problems, Joe Barnes, 07:17
Re: [Amps] Discrepencies in Pi-net calculators, Larry Benko, 00:32
Re: [Amps] Passive grid stability calculation for a tetrode?, peter chadwick, 00:08
Re: [Amps] Passive grid stability calculation for a tetrode?, TexasRF, 00:08

November 19, 2013

Re: [Amps] Commander HF-1250 problem, Bill Turner, 21:49
[Amps] Discrepencies in Pi-net calculators, Steve Flood, 21:25
Re: [Amps] Commander HF-1250 problem, Louis Parascondola, 21:17
Re: [Amps] Commander HF-1250 problem, Carl, 21:05
[Amps] Commander HF-1250 problem, doug ferguson, 20:55
Re: [Amps] Commander HF-1250 problem, Bill Turner, 19:23
Re: [Amps] Commander HF-1250 problem, Carl, 14:42
Re: [Amps] Commander HF-1250 problem, Carl, 14:42
Re: [Amps] Commander HF-1250 problem, Bill Turner, 13:43
[Amps] Commander HF-1250 problem, doug ferguson, 13:10
Re: [Amps] Commander HF-1250 problem, Bill Turner, 11:57
[Amps] Commander HF-1250 problem, doug ferguson, 11:27
Re: [Amps] Commander HF-1250 problem, Carl, 09:35
Re: [Amps] Commander HF-1250 problem, peter chadwick, 09:33
Re: [Amps] Commander HF-1250 problem, George, 08:44
Re: [Amps] Commander HF-1250 problem, Hardy Landskov, 08:06
[Amps] Commander HF-1250 problem, doug ferguson, 01:35
Re: [Amps] Commander HF-1250 problem, Tom Osborne, 00:27
Re: [Amps] Commander HF-1250 problem, Vic K2VCO, 00:09

November 18, 2013

[Amps] Commander HF-1250 problem, doug ferguson, 23:57
Re: [Amps] Burn-in for GU84b?, Leigh Turner, 17:44
Re: [Amps] Atricle on use and misuse of toroids, Bill Turner, 10:58
Re: [Amps] Burn-in for GU84b?, Carl, 09:43

November 17, 2013

[Amps] Burn-in for GU84b?, Rich Hallman - N7TR, 22:45
Re: [Amps] Ameritron AL-80A Restoration Project - need parts, Jack C. Shutt, 19:45
Re: [Amps] Ameritron AL-80A Restoration Project - need parts, Alek Petkovic, 17:37
Re: [Amps] Atricle on use and misuse of toroids, Stu Ritter, 17:31
Re: [Amps] Ameritron AL-80A Restoration Project - need parts, ZL2AAA, 15:52
[Amps] Ameritron AL-80A Restoration Project - need parts, Jack C. Shutt, 15:40

November 16, 2013

[Amps] Atricle on use and misuse of toroids, Bill Turner, 22:31
Re: [Amps] Chinese 4CX1000A from Alpha, Roger (K8RI), 22:30
Re: [Amps] Passive grid stability calculation for a tetrode?, Markku Oksanen, 14:09
Re: [Amps] Chinese 4CX1000A from Alpha, Vic, K2VCO, 11:15
Re: [Amps] Passive grid stability calculation for a tetrode?, Markku Oksanen, 09:09
Re: [Amps] Chinese 4CX1000A from Alpha, Roger (K8RI), 04:02

November 15, 2013

Re: [Amps] Chinese 4CX1000A from Alpha, Gary Smith, 22:42
Re: [Amps] Chinese 4CX1000A from Alpha, Vic K2VCO, 19:27
Re: [Amps] Passive grid stability calculation for a tetrode?, Fuqua, Bill L, 18:59
Re: [Amps] Chinese 4CX1000A from Alpha, Gary K9GS, 17:51
Re: [Amps] Passive grid stability calculation for a tetrode?, Markku Oksanen, 16:45
Re: [Amps] Passive grid stability calculation for a tetrode?, peter chadwick, 13:17
Re: [Amps] Passive grid stability calculation for a tetrode?, Fuqua, Bill L, 12:51
[Amps] Chinese 4CX1000A from Alpha, Vic K2VCO, 11:34
Re: [Amps] Passive grid stability calculation for a tetrode?, Carl, 11:22
Re: [Amps] Passive grid stability calculation for a tetrode?, peter chadwick, 11:19
Re: [Amps] Passive grid stability calculation for a tetrode?, donroden, 09:44
Re: [Amps] Passive grid stability calculation for a tetrode?, Carl, 09:22
Re: [Amps] Passive grid stability calculation for a tetrode?, peter chadwick, 05:44
Re: [Amps] Passive grid stability calculation for a tetrode?, Bill Turner, 03:43
[Amps] Passive grid stability calculation for a tetrode?, Markku Oksanen, 02:32

November 14, 2013

Re: [Amps] Chimney solved - now what about SSB/CW switch?, Carl, 15:23
Re: [Amps] UHF connector discussion For Dummies, Glen Zook, 12:48
[Amps] Chimney solved - now what about SSB/CW switch?, rick darwicki, 11:30
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Jim W7RY, 10:23
Re: [Amps] UHF connector discussion For Dummies, donroden, 10:02
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work a..., TexasRF, 09:47
Re: [Amps] All the recent UHF connector discussion, Carl, 09:44
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work a..., David Kirkby, 09:44
Re: [Amps] UHF connector discussion For Dummies, peter chadwick, 09:36
Re: [Amps] UHF connector discussion For Dummies, David Kirkby, 09:23
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., peter chadwick, 09:18
Re: [Amps] UHF CONNECTORS AND CRIMP DIES, Paul Christensen, 09:03
Re: [Amps] UHF connector discussion For Dummies, TexasRF, 08:41
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work a..., TexasRF, 08:35
Re: [Amps] UHF CONNECTORS AND CRIMP DIES, Gregory Beat, 08:22
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., David Kirkby, 07:23
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Fuqua, Bill L, 03:10
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Roger (K8RI), 02:06
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Roger (K8RI), 01:58
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., David Kirkby, 01:20
Re: [Amps] UHF connector discussion For Dummies, David Kirkby, 00:52
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Bill Turner, 00:37
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Bill Turner, 00:29

November 13, 2013

Re: [Amps] meter behavior, Fuqua, Bill L, 23:58
Re: [Amps] All the recent UHF connector discussion, Jim Brown, 23:46
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Pete Raymond, 23:10
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Pete Raymond, 23:07
Re: [Amps] UHF connector discussion For Dummies, Jim W7RY, 22:51
Re: [Amps] UHF connector discussion For Dummies, David Kirkby, 22:46
Re: [Amps] All the recent UHF connector discussion, David Kirkby, 22:03
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, WK1W Ivan Shapiro, 21:36
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Carl, 21:31
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Charles Harpole, 21:19
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Hardy Landskov, 21:12
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, donroden, 20:32
Re: [Amps] All the recent UHF connector discussion, Larry Benko, 19:48
Re: [Amps] All the recent UHF connector discussion, Carl, 19:41
[Amps] UHF connector discussion For Dummies, Charles Harpole, 19:32
Re: [Amps] All the recent UHF connector discussion, David Kirkby, 19:08
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Drax Felton, 19:04
Re: [Amps] All the recent UHF connector discussion, David Cole, 17:49
[Amps] All the recent UHF connector discussion, Larry Benko, 17:45
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Pete Raymond, 17:41
[Amps] Kenwood TL-922A for sale, Carl, 16:09
Re: [Amps] meter behavior, Carl, 14:56
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Roger (K8RI), 14:53
Re: [Amps] UHF Connectors, Carl, 14:53
Re: [Amps] meter behavior, Dan Michnay, 14:38
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Paul Christensen, 14:04
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Paul Christensen, 13:21
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, Paul Christensen, 13:08
Re: [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, N1BUG, 13:03
[Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE, WK1W Ivan Shapiro, 12:55
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Hardy Landskov, 11:24
Re: [Amps] Remote monitoring of SSPA, dsolberg, 10:26
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Dr. David Kirkby, 10:26
[Amps] GH-1 GH-1 HAM Relays, Dave Bowker, 10:26
Re: [Amps] Remote monitoring of SSPA, Manfred Mornhinweg, 10:07
Re: [Amps] Remote monitoring of SSPA, donroden, 10:00
Re: [Amps] UHF Connectors, Paul Christensen, 08:50
Re: [Amps] UHF Connectors, Roger (K8RI), 08:43
Re: [Amps] meter behavior, David Kirkby, 08:39
Re: [Amps] meter behavior, Paul Christensen, 07:45
Re: [Amps] meter behavior, Louis Parascondola, 07:31
Re: [Amps] UHF Connectors, Paul Christensen, 07:29
[Amps] meter behavior, Steve Flood, 06:51
[Amps] Remote monitoring of SSPA, Conrad Farlow, 06:26
Re: [Amps] UHF Connectors, Roger (K8RI), 02:43
Re: [Amps] UHF Connectors, Roger (K8RI), 02:40
Re: [Amps] UHF Connectors, Bill Turner, 01:15

November 12, 2013

Re: [Amps] UHF Connectors, Peter Voelpel, 20:30
Re: [Amps] UHF Connectors, David Cole, 17:50
Re: [Amps] UHF Connectors, Ian White, 17:47
Re: [Amps] UHF Connectors, Carl, 17:34
Re: [Amps] UHF Connectors, Jim Brown, 16:56
Re: [Amps] UHF Connectors, Bill Turner, 16:19
Re: [Amps] UHF Connectors, peter chadwick, 15:48
Re: [Amps] UHF Connectors, Jim Brown, 15:41
Re: [Amps] UHF Connectors, qrv@kd4e.com, 14:52
Re: [Amps] UHF Connectors, Glen Zook, 11:38
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..**, Carl, 08:38
[Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..**, Louis Parascondola, 07:52
Re: [Amps] UHF Connectors, Roger (K8RI), 01:59
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Roger (K8RI), 01:46

November 11, 2013

Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Carl, 19:38
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., peter chadwick, 16:54
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Roger (K8RI), 16:33
Re: [Amps] UHF Connectors, peter chadwick, 15:29
Re: [Amps] UHF Connectors, Fuqua, Bill L, 15:02
Re: [Amps] UHF Connectors, peter chadwick, 14:45
[Amps] UHF Connectors, Jim Brown, 14:02
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Drax Felton, 13:57
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Fuqua, Bill L, 13:37
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Peter Voelpel, 13:35
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Carl, 12:40
Re: [Amps] Best source for Gigavac GH-1 ?, Jim W7RY, 10:51
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Peter Voelpel, 10:13
Re: [Amps] Best source for Gigavac GH-1 ?, Jim Garland, 08:44
Re: [Amps] Best source for Gigavac GH-1 ?, Paul Christensen, 07:12
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., N1BUG, 06:58
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Roger (K8RI), 03:04
Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Charles Harpole, 02:03
Re: [Amps] Small vertical ceramic slug type trimmer, Jim W7RY, 01:14
Re: [Amps] Best source for Gigavac GH-1 ?, Jim W7RY, 01:00
Re: [Amps] Best source for Gigavac GH-1 ?, Jim W7RY, 00:50

November 10, 2013

[Amps] Small vertical ceramic slug type trimmer, rick darwicki, 23:35
[Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., KA4INM, 22:05
Re: [Amps] How much power through a BNC connector?, Carl, 21:19
[Amps] How much power through a BNC connector?, Bill Putney, 21:09
Re: [Amps] Autek WM-1 Schematic or Help, Jim W7RY, 20:53
Re: [Amps] Plate Choke question, Carl, 20:52
Re: [Amps] Plate Choke question, Carl, 16:17
Re: [Amps] Best source for Gigavac GH-1 ?, peter chadwick, 13:53
Re: [Amps] Plate Choke question, Steve Flood, 13:48
Re: [Amps] Best source for Gigavac GH-1 ?, Carl, 13:05
Re: [Amps] Measuring IMD, Carl, 12:52
Re: [Amps] Looking for picture of SB220 interlock switch, donroden, 12:39
Re: [Amps] Best source for Gigavac GH-1 ?, Jim Brown, 11:43
[Amps] Best source for Gigavac GH-1 ?, Jim Thomson, 11:39
Re: [Amps] Best source for Gigavac GH-1 ?, Larry Benko, 11:37
Re: [Amps] Best source for Gigavac GH-1 ?, MU 4CX250B, 11:25
Re: [Amps] Best source for Gigavac GH-1 ?, Vic K2VCO, 11:08
Re: [Amps] Best source for Gigavac GH-1 ?, Larry Benko, 10:39
Re: [Amps] Measuring IMD, peter chadwick, 10:37
[Amps] Looking for picture of SB220 interlock switch, Jim Thomson, 10:34
Re: [Amps] Best source for Gigavac GH-1 ?, Jim Garland, 09:58
[Amps] Measuring IMD, Jim Thomson, 09:41
Re: [Amps] Plate Choke question, peter chadwick, 09:33
Re: [Amps] Plate Choke question, Carl, 09:21
Re: [Amps] Plate Choke question, peter chadwick, 07:47
Re: [Amps] Best source for Gigavac GH-1 ?, peter chadwick, 07:36
Re: [Amps] Best source for Gigavac GH-1 ?, Paul Christensen, 07:35
Re: [Amps] Plate Choke question, Carl, 07:34
Re: [Amps] Screen current problem solved!, Carl, 07:34
Re: [Amps] Screen current problem solved!, Carl, 07:34
Re: [Amps] Best source for Gigavac GH-1 ?, Carl, 07:13
Re: [Amps] Plate Choke question, peter chadwick, 05:23
Re: [Amps] Screen current problem solved!, Ian White, 05:08
Re: [Amps] Screen current problem solved!, Louis Parascondola, 03:14
Re: [Amps] Best source for Gigavac GH-1 ?, Jim Brown, 01:59
Re: [Amps] Best source for Gigavac GH-1 ?, Larry Benko, 01:38
Re: [Amps] Best source for Gigavac GH-1 ?, Karl-Arne Markström, 01:09
Re: [Amps] Best source for Gigavac GH-1 ?, Bill Turner, 00:31

November 09, 2013

Re: [Amps] Best source for Gigavac GH-1 ?, Jim Brown, 23:54
Re: [Amps] Screen current problem solved!, Jim Barber, 21:48
Re: [Amps] Screen current problem solved!, Carl, 21:43
Re: [Amps] Screen current problem solved!, Peter Voelpel, 21:23
Re: [Amps] Screen current problem solved!, Roger (K8RI), 21:12
Re: [Amps] Best source for Gigavac GH-1 ?, Jim Barber, 21:12
Re: [Amps] Best source for Gigavac GH-1 ?, Mike McCarthy, W1NR, 21:05
Re: [Amps] Best source for Gigavac GH-1 ?, MU 4CX250B, 20:44
Re: [Amps] Screen current problem solved!, Carl, 20:08
Re: [Amps] Plate Choke question, Carl, 20:01
Re: [Amps] Plate Choke question, Hardy Landskov, 19:31
Re: [Amps] Plate Choke question, Leigh Turner, 19:06
Re: [Amps] Best source for Gigavac GH-1 ?, Robert Morris, 16:59
Re: [Amps] Plate Choke question, peter chadwick, 16:14
Re: [Amps] Plate Choke question, Carl, 15:10
[Amps] Best source for Gigavac GH-1 ?, John, 14:56
[Amps] Plate Choke question, Steve Flood, 14:55
[Amps] Screen current problem solved!, Vic K2VCO, 11:19
Re: [Amps] Autek WM-1 Schematic or Help, Réjean Léveillé, 09:40
Re: [Amps] AL-82 opinions, Réjean Léveillé, 09:27
Re: [Amps] Autek WM-1 Schematic or Help, peter chadwick, 04:42
Re: [Amps] Autek WM-1 Schematic or Help, Bill Turner, 01:04
Re: [Amps] Autek WM-1 Schematic or Help, Jim W7RY, 00:36
[Amps] Autek WM-1 Schematic or Help, Jim W7RY, 00:24
[Amps] Autek WM-1 Schematic or Help, Jim W7RY, 00:24

November 08, 2013

Re: [Amps] Alpha chimneys, Carl, 20:14
Re: [Amps] Alpha chimneys, Jim Barber, 18:15
Re: [Amps] Question for the tetrode experts, Vic K2VCO, 18:07
Re: [Amps] Alpha chimneys, Jim W7RY, 18:05
[Amps] Alpha chimneys, Vic K2VCO, 18:02
Re: [Amps] Question for the tetrode experts, Vic K2VCO, 17:53
[Amps] The missing linka, Bill Turner, 17:41
Re: [Amps] Question for the tetrode experts, peter chadwick, 17:22
Re: [Amps] Question for the tetrode experts, Bill Turner, 16:33
Re: [Amps] Question for the tetrode experts, Carl, 16:32
Re: [Amps] Question for the tetrode experts, Peter Voelpel, 16:30
Re: [Amps] Question for the tetrode experts, Carl, 16:19
Re: [Amps] Question for the tetrode experts, Vic K2VCO, 16:09
Re: [Amps] Question for the tetrode experts, N1BUG, 16:01
Re: [Amps] Question for the tetrode experts, Jim W7RY, 15:52
Re: [Amps] Question for the tetrode experts, donroden, 14:55
Re: [Amps] Question for the tetrode experts, Carl, 14:22
Re: [Amps] Question for the tetrode experts, Vic K2VCO, 13:37
Re: [Amps] AL-1500 fan speed switching, Jim W7RY, 12:14
Re: [Amps] Question for the tetrode experts, Jim W7RY, 12:11
Re: [Amps] Yaesu FT-2000 "TX-INH" Spec?, Jim W7RY, 12:08
Re: [Amps] Question on soft start board location on a SB1000, Jim W7RY, 11:54
Re: [Amps] [amps] West Coast Handbook, Jim W7RY, 11:49
Re: [Amps] Measuring IMD, Steef, 09:47
Re: [Amps] Chinese 15KV 2A rectifier modules?, Dr. David Kirkby, 09:47
Re: [Amps] Question for the tetrode experts, peter chadwick, 04:51
Re: [Amps] Looking for picture of SB220 interlock switch, donroden, 02:27

November 07, 2013

[Amps] Nye 3 KW antenna tuner, rick darwicki, 23:52
[Amps] AL-1500 thanks to all, rick darwicki, 23:48
Re: [Amps] Question for the tetrode experts, Roger (K8RI), 23:44
Re: [Amps] Yaesu FT-2000 "TX-INH" Spec?, Paul Christensen, 23:12
Re: [Amps] Question for the tetrode experts, Fuqua, Bill L, 21:53
Re: [Amps] AL-82 opinions, Carl, 21:20
Re: [Amps] AL-82 opinions, David Cole, 21:04
Re: [Amps] Looking for picture of SB220 interlock switch, Carl, 20:28
Re: [Amps] Question for the tetrode experts, Carl, 20:26
Re: [Amps] Question for the tetrode experts, Vic K2VCO, 19:59
Re: [Amps] AL-1500 fan speed switching, Alek Petkovic, 19:59
Re: [Amps] Question for the tetrode experts, TexasRF, 19:46
Re: [Amps] Chinese 15KV 2A rectifier modules?, Gary K9GS, 19:44
Re: [Amps] AL-1500 fan speed switching, Réjean Léveillé, 19:25
Re: [Amps] [RTTY] AL-1500 on RTTY, Louis Parascondola, 18:58
Re: [Amps] Looking for picture of SB220 interlock switch, Joe Subich, W4TV, 18:28
Re: [Amps] [RTTY] AL-1500 on RTTY, Carl, 18:19
[Amps] Question for the tetrode experts, Vic K2VCO, 18:14
Re: [Amps] Question on soft start board location on a SB1000, Bill Turner, 18:02
Re: [Amps] AL-82 opinions, Carl, 17:59
Re: [Amps] [RTTY] AL-1500 on RTTY, Bill Turner, 17:57
Re: [Amps] where to begin, Louis Parascondola, 17:56
Re: [Amps] where to begin, Alek Petkovic, 17:44
Re: [Amps] Looking for picture of SB220 interlock switch, Carl, 17:40
Re: [Amps] where to begin, Carl, 17:38
Re: [Amps] where to begin, Alek Petkovic, 17:35
[Amps] Yaesu FT-2000 "TX-INH" Spec?, Bill Putney, 16:46
Re: [Amps] where to begin, Richard Solomon, 16:45
Re: [Amps] where to begin, Joe Subich, W4TV, 16:41
Re: [Amps] where to begin, Alek Petkovic, 16:34
Re: [Amps] AL-82 opinions, David Cole, 16:11
[Amps] Question on soft start board location on a SB1000, Mike Krzystyniak, 13:44
Re: [Amps] [amps] West Coast Handbook, Richard Solomon, 12:46
Re: [Amps] where to begin, Ulf (SM0NOR), 11:50
Re: [Amps] where to begin, Vic K2VCO, 11:37
Re: [Amps] Looking for picture of SB220 interlock switch, Joe Subich, W4TV, 11:19
Re: [Amps] Looking for picture of SB220 interlock switch, Carl, 10:48
Re: [Amps] where to begin, Carl, 10:48
Re: [Amps] AL-82 opinions, Carl, 10:47
Re: [Amps] FAN SPEED, Carl, 10:47
Re: [Amps] AL-82 opinions, Paul Christensen, 08:40
Re: [Amps] where to begin, Gustavo LU6AGV, 08:19
Re: [Amps] [amps] West Coast Handbook, Don Ruokonen, 07:42
Re: [Amps] Chinese 15KV 2A rectifier modules?, peter chadwick, 03:22
[Amps] FAN SPEED, Edwin Karl, 00:57

November 06, 2013

Re: [Amps] AL-82 opinions, David Cole, 23:49
Re: [Amps] AL-82 opinions, Bill Turner, 23:38
Re: [Amps] [amps] West Coast Handbook, k7fm, 23:27
Re: [Amps] Looking for picture of SB220 interlock switch, Joe Subich, W4TV, 23:20
Re: [Amps] [amps] West Coast Handbook, Roger (K8RI), 23:09
Re: [Amps] Chinese 15KV 2A rectifier modules?, Jim W7RY, 22:56
[Amps] [amps] West Coast Handbook, Gregory Beat, 22:48
Re: [Amps] where to begin, Roger (K8RI), 22:24
[Amps] AL-1500 fan speed switching, rick darwicki, 21:46
Re: [Amps] Chinese 15KV 2A rectifier modules?, Jim Barber, 21:09
[Amps] West Coast Handbook, Richard Solomon, 21:06
Re: [Amps] AL-82 opinions, David Cole, 20:58
Re: [Amps] where to begin, Bill Turner, 20:17
[Amps] Chinese 15KV 2A rectifier modules?, Jim Barber, 19:37
[Amps] where to begin, Gustavo LU6AGV, 18:31
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Peter Voelpel, 18:10
Re: [Amps] AL-82 opinions, Bill Turner, 17:07
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Bill Turner, 17:02
Re: [Amps] AL-82 opinions, Carl, 16:53
Re: [Amps] AL-82 opinions, Bill Turner, 16:46
[Amps] AL-82 opinions, Pete Smith N4ZR, 16:13
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Joe Subich, W4TV, 14:51
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Robert Morris, 14:42
Re: [Amps] Initial RF testing of 4CX1000A amplifier, TexasRF, 13:54
Re: [Amps] Initial RF testing of 4CX1000A amplifier, TexasRF, 13:46
Re: [Amps] Making a broadband transformer, Bill Turner, 13:11
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Bill Turner, 13:04
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Ian White, 12:30
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Peter Voelpel, 12:03
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Ian White, 11:36
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Carl, 11:01
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Carl, 11:00
Re: [Amps] Looking for picture of SB220 interlock switch, Carl, 11:00
Re: [Amps] Making a broadband transformer, Saandy, 10:04
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Fuqua, Bill L, 08:03
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Bill Turner, 07:29
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Ian White, 05:11
[Amps] Looking for picture of SB220 interlock switch, Geert Jan de Groot, 04:08

November 05, 2013

Re: [Amps] Making a broadband transformer, Mike Waters, 15:43
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Carl, 15:34
[Amps] Hardline connectors wanted, Gregory Beat, 13:56
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Vic K2VCO, 11:34
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Bill Turner, 11:23
Re: [Amps] Making a broadband transformer, Bill Turner, 11:15
Re: [Amps] TL922 on 12/17, Jeff Blaine, 11:07
Re: [Amps] Making a broadband transformer, Mike Waters, 10:08
[Amps] Hardline connectors wanted, Jim Garland, 09:30
Re: [Amps] TL922 on 12/17, Vic Rosenthal, 07:50
[Amps] TL922 on 12/17, Jeff Blaine, 05:22
Re: [Amps] Initial RF testing of 4CX1000A amplifier, Vic Rosenthal, 01:23
[Amps] Initial RF testing of 4CX1000A amplifier, Vic K2VCO, 00:41

November 04, 2013

Re: [Amps] Measuring IMD, Fuqua, Bill L, 14:39
Re: [Amps] Measuring IMD, Carl, 14:16
Re: [Amps] Measuring IMD, Robert Groh, 10:11

November 03, 2013

Re: [Amps] Measuring IMD, Dave Trainor, 21:51
[Amps] Making a broadband transformer, Bill Turner, 21:15
Re: [Amps] Measuring IMD, peter chadwick, 16:26
Re: [Amps] Measuring IMD, Carl, 14:15
Re: [Amps] Measuring IMD, Jim Barber, 13:48
Re: [Amps] Measuring IMD, peter chadwick, 13:04
Re: [Amps] Measuring IMD, Manfred Mornhinweg, 12:43
Re: [Amps] Measuring IMD, peter chadwick, 12:04
Re: [Amps] Measuring IMD, Richard Solomon, 11:47
Re: [Amps] Measuring IMD, Jim Barber, 11:05
Re: [Amps] Measuring IMD, Peter Voelpel, 11:03
Re: [Amps] Measuring IMD, Jim W7RY, 09:56
Re: [Amps] Measuring IMD, Colin Lamb, 09:53
Re: [Amps] Measuring IMD, Karl-Arne Markström, 09:31
Re: [Amps] Measuring IMD, Jim Barber, 09:25
Re: [Amps] Measuring IMD, Karl-Arne Markström, 06:11
Re: [Amps] Measuring IMD, peter chadwick, 05:28

November 02, 2013

Re: [Amps] Measuring IMD, Fuqua, Bill L, 21:56
Re: [Amps] Measuring IMD, Chris Wilson, 18:57
[Amps] Two-tone test file uploaded, Jim Barber, 17:24
Re: [Amps] Measuring IMD, Jim Barber, 15:51
Re: [Amps] Measuring IMD, Jeff Blaine, 15:43
Re: [Amps] Measuring IMD, Manfred Mornhinweg, 15:18
Re: [Amps] Measuring IMD, Fuqua, Bill L, 10:50
Re: [Amps] Measuring IMD, Karl-Arne Markström, 04:07
Re: [Amps] Measuring IMD, Jim Brown, 03:45
Re: [Amps] Measuring IMD, Bill Turner, 03:06
Re: [Amps] Measuring IMD, Leigh Turner, 01:26
[Amps] Measuring IMD, Bill Turner, 00:31

November 01, 2013

Re: [Amps] TL922 on 12/17, Jeff Blaine, 23:38
Re: [Amps] Large Variac controlling HV power supply, donroden, 19:52
[Amps] W7RY QSK Parts Back on EBay, Jim W7RY, 18:52
[Amps] NEW 3CX1500A7/8877 FOR SALE, wt8r, 16:21
Re: [Amps] Large Variac controlling HV power supply, wt8r, 13:08
Re: [Amps] AL-1500 Problems, Al Kozakiewicz, 11:34
[Amps] AL-1500 Problems, rick darwicki, 11:25
Re: [Amps] Â GS23B Plate load resistance for HF, Carl, 11:21
[Amps] Large Variac controlling HV power supply, Jim Thomson, 06:28
Re: [Amps] GS23B Plate load resistance for HF, Jim Thomson, 04:24
Re: [Amps] GS23B Plate load resistance for HF, peter chadwick, 04:16
[Amps] GS23B Plate load resistance for HF, Jim Thomson, 01:31
Re: [Amps] GS23B Plate load resistance for HF / audio analogy, Jeff Blaine, 00:00