Amps
[Top] [All Lists]

Re: [Amps] All the recent UHF connector discussion

To: "Larry Benko" <xxw0qe@comcast.net>, <amps@contesting.com>
Subject: Re: [Amps] All the recent UHF connector discussion
From: "Carl" <km1h@jeremy.mv.com>
Date: Wed, 13 Nov 2013 19:41:24 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
That page is a keeper, thanks.

Ive also heard many in the weak signal UHF community say that the VSWR reaches a peak at around 432 and then slowly decreases to where it is again useable at 903 and 1296.

Carl
KM1H


----- Original Message ----- From: "Larry Benko" <xxw0qe@comcast.net>
To: <amps@contesting.com>
Sent: Wednesday, November 13, 2013 5:45 PM
Subject: [Amps] All the recent UHF connector discussion


I had made some UHF connector measurements recently and this discussion encouraged me to publish them.

If interested see http://www.w0qe.com/Technical_Topics/uhf_connector_compensation.html

73,
Larry, W0QE
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3222/6332 - Release Date: 11/13/13


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>