On 11/24/2013 1:26 PM, Hardy Landskov wrote:
All,
Here's what I could garner. These are just Amphenol crimp connectors straight
out of the Mouser catalog so it does not include overseas stuff or other
American vendors.
9913 is an RG8 size cable. 0.429, not 0.118
All the LMR-600 tools I've seen are single purpose.
Mine in a lever action that slides the one side of the die horizontally
which is part of the tool
73
Roger (K8RI)
P/N Coax Die size(inches)
172128 LMR-100, RG174, 0.128
RG188A/U, RG316U
172171 RG316/U double shield 0.151
171142 LMR-400 0.429
171100 RG59/U, RG142 0.213
172214 LMR-200, LMR-240 0.213
RG8X
172135 Belden 7808A 0.255
172202 LMR-600 0.610
172102 RG-8, RG-213 0.429
172166 RG-214, LMR-400 0.429
172101 RG-59/U 0.255
172102H243 LMR-400/B9913 0.429
? Belden 9913 0.118
Notes
1) I did not locate a crimp tool for LMR-600.
2) I did not find a connector for 9913 but I have a note that 0.118 is the die
size.
3) Add 523- in front of the Amphenol P/N to get the Mouser number.
4) Notice that Amphenol makes different connectors for the same coax, RG-59
for example.
I have no explanation for this.
I actually made an Excel spreadsheet but I guess this reflector does not allow
attachments.
73 Hardy N7RT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|